None | FRONTLINE Maintenance Tool

PackEye Operational Test

Last Updated: 04/26/2025 1:39 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Thermo FHT1377 PackEye	Device	Published	10/28/2024 3:37 PM
247 - 257 - Prepare instrument; Remark:	Procedure Step	Published	04/11/2025 9:08 PM
257 - Prepare instrument	Instruction	Published	04/11/2025 9:07 PM
786 - 219 - Verify there are no sources of radiation near instrument; Remark:7	Procedure Step	Published	04/20/2025 6:37 PM
219 - Verify there are no sources of radiation near instrument	Instruction	Published	04/12/2025 4:20 PM
7 - No Radiation symbol	Remark	Published	07/12/2021 1:34 PM
3852 - 220 - Power on instrument; Remark:3836	Procedure Step	Published	03/29/2022 1:59 AM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
3836 - Press power button on the indicator unit for approximately 1 second.	Remark	Published	03/29/2022 1:05 AM
3853 - 612 - Wait for instrument to complete start-up sequence; Remark:3837	Procedure Step	Published	04/13/2025 6:49 PM
612 - Wait for instrument to complete start-up sequence	Instruction	Published	04/13/2025 6:38 PM
3837 - Initialization and background measurement may take about 20 seconds. During t...	Remark	Published	03/29/2022 1:08 AM
3854 - 3825 - Verify instrument is ready; Remark:3838	Procedure Step	Published	03/29/2022 2:01 AM
3825 - Verify instrument is ready	Instruction	Published	03/28/2022 6:15 PM
3838 - The flashing green nat light indicates PackEye is ready for ...	Remark	Published	03/29/2022 1:10 AM
3855 - 3826 - Verify fail light is off; Remark:3839	Procedure Step	Published	03/29/2022 2:02 AM
3826 - Verify fail light is off	Instruction	Published	03/28/2022 6:16 PM
3839 - Solid yellow light: neutron detector or electronic failure.	Remark	Published	03/29/2022 1:12 AM
3840 - Flashing yellow light: high gamma radiation level or gamma detector failure.	Remark	Published	03/29/2022 1:13 AM
3856 - 1437 - Verify Response to Gamma Source; Remark:	Procedure Step	Published	03/29/2022 2:03 AM
1437 - Verify Response to Gamma Source	Instruction	Published	09/01/2020 7:45 PM
3857 - 3827 - Select Alarm mode; Remark:3841	Procedure Step	Published	03/29/2022 2:04 AM
3827 - Select Alarm mode	Instruction	Published	03/28/2022 6:17 PM
3841 - The green LED is off. Briefly press power button to change modes.	Remark	Published	03/29/2022 1:15 AM
3858 - 3828 - Place gamma source on instrument; Remark:3842	Procedure Step	Published	03/29/2022 2:05 AM
3828 - Place gamma source on instrument	Instruction	Published	03/28/2022 6:18 PM
3842 - IO PackEye Gamma Source Placed	Remark	Published	03/29/2022 1:23 AM
3859 - 1439 - Verify instrument responds to radioactive source; Remark:3843	Procedure Step	Published	03/29/2022 2:06 AM
1439 - Verify instrument responds to radioactive source	Instruction	Published	06/29/2022 11:50 PM
3843 - Additional gamma indicator lights will illuminate on indicator unit and an au...	Remark	Published	03/29/2022 1:22 AM
3860 - 3829 - Acknowledge gamma alarm; Remark:3844	Procedure Step	Published	03/29/2022 2:07 AM
3829 - Acknowledge gamma alarm	Instruction	Published	03/28/2022 6:20 PM
3844 - Briefly press gamma button to acknowledge alarm.	Remark	Published	03/29/2022 1:25 AM
3835 - 3830 - Move source away from instrument; Remark:246	Procedure Step	Published	03/28/2022 6:31 PM
3830 - Move source away from instrument	Instruction	Published	03/28/2022 6:20 PM
246 - IO No source trefoil	Remark	Published	10/07/2024 11:39 AM
3861 - 3831 - Select Chirper mode; Remark:3845	Procedure Step	Published	03/29/2022 2:08 AM
3831 - Select Chirper mode	Instruction	Published	03/28/2022 6:21 PM
3845 - The green LED is on. Briefly press power button to change modes.	Remark	Published	03/29/2022 1:26 AM
3871 - 3828 - Place gamma source on instrument; Remark:3842	Procedure Step	Published	04/04/2022 11:00 AM
3862 - 1439 - Verify instrument responds to radioactive source; Remark:3846	Procedure Step	Published	03/29/2022 2:09 AM
3846 - Additional gamma indicator lights will illuminate. Audible chirper pitch will...	Remark	Published	03/29/2022 1:28 AM
3872 - 3830 - Move source away from instrument; Remark:246	Procedure Step	Published	04/04/2022 11:00 AM
3863 - 3832 - Verify Response to Neutron Source; Remark:	Procedure Step	Published	03/29/2022 2:10 AM
3832 - Verify Response to Neutron Source	Instruction	Published	03/29/2022 2:56 AM
3864 - 3827 - Select Alarm mode; Remark:3841	Procedure Step	Published	03/29/2022 2:11 AM
3865 - 3833 - Place neutron source on instrument; Remark:3847	Procedure Step	Published	03/29/2022 2:17 AM
3833 - Place neutron source on instrument	Instruction	Published	03/28/2022 6:24 PM
3847 - IO PackEye Neutron Source Placed	Remark	Published	03/29/2022 1:32 AM
3866 - 1439 - Verify instrument responds to radioactive source; Remark:3848	Procedure Step	Published	03/29/2022 2:19 AM
3848 - Additional neutron indicator lights will illuminate and an alarm will sound. ...	Remark	Published	03/29/2022 1:34 AM
3867 - 3834 - Acknowledge neutron alarm; Remark:3849	Procedure Step	Published	03/29/2022 2:20 AM
3834 - Acknowledge neutron alarm	Instruction	Published	03/28/2022 6:25 PM
3849 - Briefly press neutron button to acknowledge alarm.	Remark	Published	03/29/2022 1:35 AM
3873 - 3833 - Place neutron source on instrument; Remark:3847	Procedure Step	Published	04/04/2022 11:15 AM
3868 - 1439 - Verify instrument responds to radioactive source; Remark:3851	Procedure Step	Published	04/04/2022 11:03 AM
3851 - Additional neutron indicator lights will illuminate and an alarm will sound. ...	Remark	Published	04/01/2022 1:26 PM
3869 - 313 - Power off instrument; Remark:3850	Procedure Step	Published	03/29/2022 2:23 AM
313 - Power off instrument	Instruction	Published	07/23/2021 2:41 PM
3850 - Press and hold the power button for approximately 10 seconds until indicator ...	Remark	Published	03/29/2022 1:38 AM
253 - 242 - Document and report any unresolved problems; Remark:	Procedure Step	Published	06/22/2021 10:23 AM
242 - Document and report any unresolved problems	Instruction	Published	04/21/2025 11:45 AM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
10 minutes	Duration	Published	04/01/2020 11:35 AM
Annually	Frequency	Published	04/01/2020 11:37 AM
Daily	Frequency	Published	04/01/2020 11:36 AM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
No Radiation Symbol	Image	Published	08/13/2024 2:56 PM
packeye_ui_power_on_00719	Image	Published	02/07/2022 1:46 AM
PackEye art light highlighted	Image	Published	02/19/2022 1:48 AM
PackEye Nat light flashing	Image	Published	02/19/2022 1:48 AM
packeye_fail_solid_yellow.jpg	Image	Published	10/20/2023 10:36 AM
packeye_fail_flashing_yellow.jpg	Image	Published	10/20/2023 10:36 AM
Alarm mode	Image	Published	02/19/2022 1:48 AM
packeye_radsource_placeright.jpg	Image	Published	10/20/2023 10:46 AM
packeye_gamma_radsource_indicator.jpg	Image	Published	10/20/2023 10:39 AM
Packeye acknowledge gamma alarm	Image	Published	02/19/2022 1:48 AM
Chirper mode	Image	Published	02/19/2022 1:48 AM
packeye_gamma_radsource_chirp.jpg	Image	Published	10/20/2023 10:38 AM
packeye_neutronradsource_placeright.jpg	Image	Published	10/20/2023 10:45 AM
packeye_neutron_radsource_indicator.jpg	Image	Published	10/20/2023 10:44 AM
Acknowledge_neutron.png	Image	Published	02/19/2022 1:48 AM
packeye_neutron_radsource_chirp.jpg	Image	Published	10/20/2023 10:43 AM
Power off Packeye	Image	Published	02/19/2022 1:48 AM

Read more about PackEye Operational Test

RadSeeker Operational Test

Last Updated: 04/26/2025 1:38 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Smiths Detection RadSeeker CS	Device	Published	06/27/2024 12:54 PM
247 - 257 - Prepare instrument; Remark:	Procedure Step	Published	04/11/2025 9:08 PM
257 - Prepare instrument	Instruction	Published	04/11/2025 9:07 PM
786 - 219 - Verify there are no sources of radiation near instrument; Remark:7	Procedure Step	Published	04/20/2025 6:37 PM
219 - Verify there are no sources of radiation near instrument	Instruction	Published	04/12/2025 4:20 PM
7 - No Radiation symbol	Remark	Published	07/12/2021 1:34 PM
3512 - 2295 - Verify sufficient battery charge; Remark:2297	Procedure Step	Published	07/28/2021 9:32 PM
2295 - Verify sufficient battery charge	Instruction	Published	04/06/2021 4:43 PM
2297 - IO RadSeeker 3 bar Battery	Remark	Published	10/19/2024 10:28 PM
2460 - 220 - Power on instrument; Remark:2303	Procedure Step	Published	11/04/2020 5:34 PM
2360 - Caution : Temperature must be above -15°C for instrument to start. Do not operate the ...	Annotation	Published	11/04/2020 5:27 PM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
2303 - Press and hold ENTER button until display powers on (3 to 5 ...	Remark	Published	07/23/2021 8:41 PM
2298 - IO RadSeeker Button Pad Select Button Yellow Box	Remark	Published	10/21/2024 7:26 PM
2462 - 612 - Wait for instrument to complete start-up sequence; Remark:2306	Procedure Step	Published	04/13/2025 6:49 PM
612 - Wait for instrument to complete start-up sequence	Instruction	Published	04/13/2025 6:38 PM
2306 - The instrument will automatically enter Detect mode after sy...	Remark	Published	07/23/2021 8:45 PM
252 - 232 - Check instrument gamma response; Remark:	Procedure Step	Published	07/29/2021 11:10 AM
232 - Check instrument gamma response	Instruction	Published	07/23/2021 9:58 AM
3513 - 2352 - Verify Audible Dose Rate Indicator (ADI) is on; Remark:3502	Procedure Step	Published	07/28/2021 9:34 PM
2352 - Verify Audible Dose Rate Indicator (ADI) is on	Instruction	Published	07/29/2021 12:52 PM
3502 - Use ADI button to activate an auditory equivalent to the visual historical gr...	Remark	Published	07/28/2021 9:18 PM
2324 - IO RadSeeker ADI Bar	Remark	Published	10/21/2024 7:33 PM
3514 - 235 - Place instrument next to radioactive gamma source; Remark:3507	Procedure Step	Published	06/06/2022 5:25 PM
235 - Place instrument next to radioactive gamma source	Instruction	Published	07/09/2021 1:39 PM
3507 - IO RadSeeker Closer to Trefoil	Remark	Published	10/21/2024 8:54 PM
3515 - 3509 - Verify DETECT mode responds correctly; Remark:3510	Procedure Step	Published	07/28/2021 9:36 PM
3509 - Verify DETECT mode responds correctly	Instruction	Published	07/28/2021 9:37 PM
3510 - The instrument should respond as follows:	Remark	Published	07/28/2021 9:28 PM
2310 - Gamma Dose Rate (µSv/hr) values will increase. Gamma coun...	Remark	Published	11/04/2020 7:38 AM
3516 - 241 - Move instrument away from radioactive gamma source; Remark:3508	Procedure Step	Published	06/06/2022 5:27 PM
241 - Move instrument away from radioactive gamma source	Instruction	Published	06/25/2021 12:22 PM
3508 - IO RadSeeker Away from Trefoil	Remark	Published	10/21/2024 8:54 PM
3517 - 3511 - Check Instrument Neutron Response; Remark:	Procedure Step	Published	07/28/2021 9:39 PM
3511 - Check Instrument Neutron Response	Instruction	Published	07/28/2021 9:29 PM
3519 - 3095 - Place instrument next to radioactive neutron source; Remark:3507	Procedure Step	Published	06/06/2022 6:30 PM
3095 - Place instrument next to radioactive neutron source	Instruction	Published	07/16/2021 10:49 AM
3518 - 3501 - Verify DETECT mode responds correctly; Remark:3500	Procedure Step	Published	07/28/2021 9:40 PM
3096 - Note : Most radioactive neutron sources also have a gamma component, which will likely ...	Annotation	Published	07/23/2021 9:57 AM
3501 - Verify DETECT mode responds correctly	Instruction	Published	07/28/2021 9:12 PM
3500 - The instrument should respond as follows: Vibrate and alarm...	Remark	Published	07/28/2021 9:42 PM
3499 - N-cps values will increase and have a red color. Moving gr...	Remark	Published	07/28/2021 9:10 PM
3520 - 3098 - Move instrument away from radioactive neutron source; Remark:3508	Procedure Step	Published	06/06/2022 6:33 PM
3098 - Move instrument away from radioactive neutron source	Instruction	Published	07/16/2021 10:54 AM
2251 - 2217 - Perform Identification Measurement; Remark:	Procedure Step	Published	07/28/2021 9:55 PM
2217 - Perform Identification Measurement	Instruction	Published	04/06/2021 5:13 PM
3521 - 859 - Start identification measurement; Remark:3498	Procedure Step	Published	07/28/2021 9:46 PM
859 - Start identification measurement	Instruction	Published	10/26/2020 7:00 PM
3498 - Press ENTER under Start ID	Remark	Published	07/28/2021 9:07 PM
3486 - IO RadSeeker StartID Small Menu	Remark	Published	10/21/2024 8:54 PM
2491 - 2220 - Wait for measurement to complete; Remark:2321	Procedure Step	Published	04/20/2025 12:55 PM
2220 - Wait for measurement to complete	Instruction	Published	10/22/2020 11:15 AM
2321 - IO RadSeeker Collecting Spectrum Wait	Remark	Published	10/21/2024 8:36 PM
2492 - 2357 - Acknowledge alarms; Remark:2326	Procedure Step	Published	11/04/2020 5:49 PM
2357 - Acknowledge alarms	Instruction	Published	07/23/2021 9:29 PM
2326 - Press ENTER to acknowledge innocent or threat alarms.	Remark	Published	07/23/2021 9:35 PM
2320 - IO RadSeeker Alarm Acknowledge Threat	Remark	Published	10/21/2024 8:40 PM
3522 - 1442 - Verify identification results are correct; Remark:3497	Procedure Step	Published	07/28/2021 9:47 PM
1442 - Verify identification results are correct	Instruction	Published	09/02/2020 3:03 PM
3497 - Identification results should match the isotopes associated with the radioact...	Remark	Published	07/28/2021 9:04 PM
2319 - IO RadSeeker Identify Isotope Co60	Remark	Published	10/21/2024 8:42 PM
253 - 242 - Document and report any unresolved problems; Remark:	Procedure Step	Published	06/22/2021 10:23 AM
242 - Document and report any unresolved problems	Instruction	Published	04/21/2025 11:45 AM
Operator Procedure	Document Type	Published	03/02/2020 3:31 PM
5 minutes	Duration	Published	04/01/2020 11:35 AM
Annually	Frequency	Published	04/01/2020 11:37 AM
Before each use	Frequency	Published	08/31/2020 5:00 PM
Monthly	Frequency	Published	04/01/2020 11:36 AM
Caution	Annotation Type	Published	03/02/2020 3:24 PM
Note	Annotation Type	Published	03/02/2020 3:25 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
No Radiation Symbol	Image	Published	08/13/2024 2:56 PM
radseeker_di_battbar_000477.jpg	Image	Published	10/18/2023 4:32 PM
radseeker_di_selectmiddle_00473.jpg	Image	Published	10/20/2023 9:35 AM
radseeker_ui_modedetect_217cps_00467.jpg	Image	Published	10/20/2023 10:15 AM
radseeker_ui_adiselect_00471.jpg	Image	Published	10/20/2023 9:42 AM
radseeker_di_MoveToward_rad_00668.jpg	Image	Published	10/20/2023 9:33 AM
radseeker_ui_increasgr_11164cps_00463.jpg	Image	Published	10/20/2023 10:07 AM
radseeker_di_MoveAway_rad_00669.jpg	Image	Published	10/20/2023 9:32 AM
radseeker_ui_neutronalarmack_nobutton_252cps_00654.jpg	Image	Published	10/20/2023 10:18 AM
radseeker_ui_alarm_neutron_1783cps_00656.jpg	Image	Published	10/20/2023 9:43 AM
radseeker_ui_menustartid_button_00651.jpg	Image	Published	10/20/2023 10:11 AM
radseeker_ui_collectspec_00468.jpg	Image	Published	10/20/2023 9:46 AM
radseeker_ui_threatack_1025cps_00457.jpg	Image	Published	10/20/2023 10:22 AM
radseeker_ui_idco60_902cps_00465.jpg	Image	Published	10/20/2023 10:06 AM

Read more about RadSeeker Operational Test

identiFINDER 2 Functional Test

Last Updated: 04/26/2025 1:38 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
FLIR identiFINDER 2 NG	Device	Published	10/24/2024 10:14 AM
3292 - 220 - Power on instrument; Remark:3246	Procedure Step	Published	04/07/2025 2:24 PM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
3246 - IDF2 Dose Rate Screen	Remark	Published	05/25/2021 7:26 PM
3293 - 3259 - Perform factory test on instrument and report any issues; Remark:	Procedure Step	Published	05/25/2021 7:29 PM
3259 - Perform factory test on instrument and report any issues	Instruction	Published	05/25/2021 5:38 PM
3294 - 3260 - Press “R” button to select Options; Remark:	Procedure Step	Published	05/25/2021 7:55 PM
3260 - Press “R” button to select Options	Instruction	Published	05/25/2021 7:54 PM
3295 - 3261 - Press “M” button to select Advanced Menu; Remark:3277	Procedure Step	Published	06/03/2021 2:28 PM
3261 - Press “M” button to select Advanced Menu	Instruction	Published	05/25/2021 5:49 PM
3277 - If prompted, enter the password (normally “LLLLLLL”) and press “	Remark	Published	10/05/2022 4:41 PM
3296 - 3262 - Press “M” button to select More Options; Remark:	Procedure Step	Published	05/25/2021 7:33 PM
3262 - Press “M” button to select More Options	Instruction	Published	05/25/2021 5:51 PM
3297 - 3263 - Press “L” button to scroll down and press “M” button to select Advanc...; Remark:	Procedure Step	Published	05/25/2021 6:53 PM
3263 - Press “L” button to scroll down and press “M” button to select Advanc...	Instruction	Published	05/25/2021 5:54 PM
3298 - 3264 - Press “L” button to scroll down and press “M” button to select Mainte...; Remark:	Procedure Step	Published	05/25/2021 7:04 PM
3264 - Press “L” button to scroll down and press “M” button to select Mainte...	Instruction	Published	05/25/2021 6:04 PM
3299 - 3265 - Press “L” button to scroll down and press “M” button to select Self-T...; Remark:	Procedure Step	Published	05/25/2021 7:05 PM
3265 - Press “L” button to scroll down and press “M” button to select Self-T...	Instruction	Published	05/25/2021 6:07 PM
3300 - 3266 - Press “M” button to start Self-Test; Remark:3279	Procedure Step	Published	05/25/2021 7:06 PM
3266 - Press “M” button to start Self-Test	Instruction	Published	05/25/2021 6:09 PM
3279 - The instrument will perform a series of self-checks (various displays, alarm ...	Remark	Published	05/25/2021 6:36 PM
3301 - 3278 - Press “R” button to exit back to Dose Rate screen; Remark:	Procedure Step	Published	05/25/2021 7:07 PM
3278 - Press “R” button to exit back to Dose Rate screen	Instruction	Published	05/25/2021 6:29 PM
3302 - 3267 - Verify Finder mode functionality; Remark:3291	Procedure Step	Published	05/25/2021 7:08 PM
3280 - Note : Before entering the Finder mode, ensure that the instrument is not near any r...	Annotation	Published	05/25/2021 6:38 PM
3267 - Verify Finder mode functionality	Instruction	Published	10/07/2022 3:47 PM
3291 - IO IDF Exclude Radiation Source	Remark	Published	05/11/2021 6:58 PM
3303 - 3268 - Enter Finder mode by pressing “L” button; Remark:3282	Procedure Step	Published	05/25/2021 7:09 PM
3268 - Enter Finder mode by pressing “L” button	Instruction	Published	05/25/2021 6:13 PM
3282 - IO IDF Dose Mode to Finder	Remark	Published	05/12/2021 11:10 AM
3281 - Upon entering Finder mode, the instrument will collect a background for 10 se...	Remark	Published	05/25/2021 6:41 PM
3304 - 3269 - Move instrument close to radioactive source and then farther away.; Remark:3283	Procedure Step	Published	05/25/2021 7:10 PM
3269 - Move instrument close to radioactive source and then farther away.	Instruction	Published	05/25/2021 6:15 PM
3283 - The identiFINDER will indicate the presence of elevated radiation levels with...	Remark	Published	05/25/2021 6:43 PM
3290 - IO IDF Vibrate Near Source Crate	Remark	Published	05/11/2021 6:55 PM
3305 - 3270 - Verify Identify mode functionality; Remark:	Procedure Step	Published	05/25/2021 7:12 PM
3270 - Verify Identify mode functionality	Instruction	Published	05/25/2021 6:17 PM
3306 - 235 - Place instrument next to radioactive gamma source; Remark:3288	Procedure Step	Published	05/25/2021 7:13 PM
235 - Place instrument next to radioactive gamma source	Instruction	Published	07/09/2021 1:39 PM
3288 - IO IDF Near Radiation Source	Remark	Published	05/11/2021 6:47 PM
3307 - 3272 - From Dose Rate or Finder mode, press “M” button to enter Identify mode; Remark:3289	Procedure Step	Published	05/19/2022 5:53 PM
3272 - From Dose Rate or Finder mode, press “M” button to enter Identify mode	Instruction	Published	05/25/2021 6:20 PM
3289 - IO IDF Menu Identify Button M	Remark	Published	05/11/2021 6:53 PM
3287 - Ensure the instrument is as close to the source as possible, trying to mainta...	Remark	Published	05/25/2021 6:51 PM
3167 - IdentiFINDER2-NG Point unit to Source	Remark	Published	05/19/2022 5:52 PM
3308 - 3273 - Leave instrument next to the source(s); Remark:3284	Procedure Step	Published	05/25/2021 7:17 PM
3273 - Leave instrument next to the source(s)	Instruction	Published	05/25/2021 6:22 PM
3284 - Usually 120 seconds, until the instrument completes the data collection and a...	Remark	Published	05/19/2022 5:57 PM
3309 - 3274 - Verify results agree with known radioactive source(s) (e.g. Co-57, Na-22, Ba-...; Remark:3201	Procedure Step	Published	05/25/2021 7:18 PM
3274 - Verify results agree with known radioactive source(s) (e.g. Co-57, Na-22, Ba-...	Instruction	Published	05/25/2021 6:24 PM
3201 - IDF2 - List of Identified Nuclides	Remark	Published	05/05/2021 2:20 PM
3310 - 3275 - Select Exit (may need to select Skip first) to return to Dose Rate or Finder ...; Remark:	Procedure Step	Published	05/25/2021 7:20 PM
3275 - Select Exit (may need to select Skip first) to return to Dose Rate or Finder ...	Instruction	Published	05/25/2021 6:26 PM
3311 - 3276 - Record name, maintenance performed, problems observed, and date and time in o...; Remark:3285	Procedure Step	Published	05/25/2021 7:21 PM
3276 - Record name, maintenance performed, problems observed, and date and time in o...	Instruction	Published	05/25/2021 6:28 PM
3285 - Report any unresolved problems to the local maintenance provider or sustainab...	Remark	Published	05/25/2021 6:47 PM
3286 - If identiFINDER is not functioning correctly, perform troubleshooting by refe...	Remark	Published	05/25/2021 6:49 PM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
5 minutes	Duration	Published	04/01/2020 11:35 AM
Annually	Frequency	Published	04/01/2020 11:37 AM
Note	Annotation Type	Published	03/02/2020 3:25 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
IDF2_ui_doseratemode2_609.png	Image	Published	05/02/2021 2:52 AM
IDF Middle Button	Image	Published	05/25/2021 7:45 PM
IDF No Radiation Source Near	Image	Published	05/11/2021 2:03 AM
IDF Select Finder Button L	Image	Published	05/12/2021 3:05 AM
IDF Finder Mode Partial chart 4 sec	Image	Published	05/01/2021 2:01 AM
IDF Finder Mode Rolling Graph Peaks	Image	Published	05/01/2021 2:01 AM
IDF Gamma Alarm Vibrate	Image	Published	05/11/2021 2:03 AM
IDF_di_Trefoil_640_0.png	Image	Published	05/13/2021 2:05 AM
IDF Select Identify Button M Dose Screen	Image	Published	05/12/2021 3:05 AM
IDF Select Identify Button M	Image	Published	05/12/2021 3:05 AM
identiFINDER Keep Distance RedArrow	Image	Published	05/19/2022 5:46 PM
IDF Isotope List	Image	Published	05/01/2021 2:01 AM

Read more about identiFINDER 2 Functional Test

Radiation Pager Routine Assessment

Last Updated: 04/26/2025 1:38 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Sensor Tech Radiation Pager	Device	Published	10/28/2024 3:52 PM
2971 - 1765 - Document serial number(s); Remark:2968	Procedure Step	Published	06/22/2021 9:29 AM
1765 - Document serial number(s)	Instruction	Published	06/15/2021 9:17 AM
2968 - Record information on the Radiation Pager Assessment Form.	Remark	Published	06/16/2021 10:42 PM
2972 - 319 - Perform operational test; Remark:2865	Procedure Step	Published	06/22/2021 2:04 PM
319 - Perform operational test	Instruction	Published	06/10/2021 8:31 PM
2865 - DET-HHD-STE-RPG-RM01, Radiation Pager Operational Test.	Remark	Published	08/02/2022 12:02 PM
2973 - 2969 - Replace batteries; Remark:2970	Procedure Step	Published	06/22/2021 2:04 PM
2969 - Replace batteries	Instruction	Published	06/16/2021 10:38 PM
2970 - DET-HHD-STE-RPG-CM01, Radiation Pager Battery Replacement.	Remark	Published	08/02/2022 11:54 AM
354 - 346 - Submit assessment form; Remark:353	Procedure Step	Published	06/22/2021 2:05 PM
346 - Submit assessment form	Instruction	Published	06/16/2021 10:39 PM
353 - Submit assessment form or HATS assessment form electronically to proper autho...	Remark	Published	06/16/2021 10:40 PM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
5 minutes	Duration	Published	04/01/2020 11:35 AM
Annually	Frequency	Published	04/01/2020 11:37 AM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
Radiation_Pager Serial Number_000584.png	Image	Published	10/18/2021 1:52 AM

Read more about Radiation Pager Routine Assessment

Radiation Pager Operational Test

Last Updated: 04/26/2025 1:38 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Sensor Tech Radiation Pager	Device	Published	10/28/2024 3:52 PM
247 - 257 - Prepare instrument; Remark:	Procedure Step	Published	04/11/2025 9:08 PM
257 - Prepare instrument	Instruction	Published	04/11/2025 9:07 PM
786 - 219 - Verify there are no sources of radiation near instrument; Remark:7	Procedure Step	Published	04/20/2025 6:37 PM
219 - Verify there are no sources of radiation near instrument	Instruction	Published	04/12/2025 4:20 PM
7 - No Radiation symbol	Remark	Published	07/12/2021 1:34 PM
2933 - 220 - Power on instrument; Remark:2921	Procedure Step	Published	06/22/2021 10:03 AM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
2921 - Set instrument to audio-only mode.	Remark	Published	06/15/2021 4:14 PM
2934 - 2922 - Verify instrument initializes successfully; Remark:2923	Procedure Step	Published	06/22/2021 10:03 AM
2922 - Verify instrument initializes successfully	Instruction	Published	06/15/2021 4:06 PM
2923 - Yellow light will illuminate first.	Remark	Published	06/15/2021 4:15 PM
2924 - Green light will illuminate briefly when pager is ready.	Remark	Published	06/15/2021 4:16 PM
2913 - 2911 - Test audio alarm; Remark:	Procedure Step	Published	06/22/2021 10:04 AM
2911 - Test audio alarm	Instruction	Published	06/15/2021 4:06 PM
2935 - 235 - Place instrument next to radioactive gamma source; Remark:2951	Procedure Step	Published	06/22/2021 10:06 AM
235 - Place instrument next to radioactive gamma source	Instruction	Published	07/09/2021 1:39 PM
2951 - IO RadPager Move To Source No Alarm Audible	Remark	Published	10/26/2024 9:16 AM
2939 - 2936 - Verify audible alarm functions correctly; Remark:2926	Procedure Step	Published	06/22/2021 10:07 AM
2936 - Verify audible alarm functions correctly	Instruction	Published	06/15/2021 4:09 PM
2926 - Alarm will be heard and the yellow light will illuminate in response to the s...	Remark	Published	07/06/2021 10:44 AM
2940 - 2937 - Press acknowledge button; Remark:2927	Procedure Step	Published	06/22/2021 10:14 AM
2937 - Press acknowledge button	Instruction	Published	06/15/2021 4:09 PM
2927 - Alarm level will display.	Remark	Published	07/09/2021 12:21 PM
2941 - 241 - Move instrument away from radioactive gamma source; Remark:2964	Procedure Step	Published	07/09/2021 2:18 PM
241 - Move instrument away from radioactive gamma source	Instruction	Published	06/25/2021 12:22 PM
2964 - IO RadPager Move Source Audible Mode	Remark	Published	10/26/2024 9:24 AM
2942 - 313 - Power off instrument; Remark:2929	Procedure Step	Published	06/22/2021 10:19 AM
313 - Power off instrument	Instruction	Published	07/23/2021 2:41 PM
2929 - IO RadPager Power Off Button	Remark	Published	10/26/2024 10:45 AM
2914 - 2912 - Test vibration alarm; Remark:	Procedure Step	Published	06/06/2022 5:28 PM
2912 - Test vibration alarm	Instruction	Published	06/15/2021 4:11 PM
2943 - 220 - Power on instrument; Remark:2947	Procedure Step	Published	06/22/2021 10:20 AM
2947 - Set instrument to vibration-only mode.	Remark	Published	07/06/2021 10:45 AM
2944 - 235 - Place instrument next to radioactive gamma source; Remark:2925	Procedure Step	Published	06/22/2021 10:21 AM
2925 - IO RadPager Move To Source No Alarm	Remark	Published	10/26/2024 10:46 AM
2945 - 2938 - Verify vibration alarm functions correctly; Remark:2930	Procedure Step	Published	06/22/2021 10:22 AM
2938 - Verify vibration alarm functions correctly	Instruction	Published	06/15/2021 4:12 PM
2930 - Pager will vibrate and the yellow light will illuminate in response to the so...	Remark	Published	07/07/2021 9:54 AM
2946 - 2937 - Press acknowledge button; Remark:2931	Procedure Step	Published	06/22/2021 10:22 AM
2931 - Alarm level will display.	Remark	Published	07/06/2021 10:46 AM
2967 - 241 - Move instrument away from radioactive gamma source; Remark:2928	Procedure Step	Published	07/09/2021 2:17 PM
2928 - IO RadPager Move Away Source No Alarm Vib	Remark	Published	10/26/2024 10:50 AM
253 - 242 - Document and report any unresolved problems; Remark:	Procedure Step	Published	06/22/2021 10:23 AM
242 - Document and report any unresolved problems	Instruction	Published	04/21/2025 11:45 AM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
2 minutes	Duration	Published	03/26/2021 3:33 PM
Before each use	Frequency	Published	08/31/2020 5:00 PM
Daily	Frequency	Published	04/01/2020 11:36 AM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
No Radiation Symbol	Image	Published	08/13/2024 2:56 PM
RadPager Power On Audio On Mode	Image	Published	03/27/2021 1:42 AM
Radiation Pager evaluate alarm	Image	Published	03/27/2021 1:42 AM
Radiation Pager green light	Image	Published	03/27/2021 1:42 AM
Radiation Pager by source	Image	Published	03/27/2021 1:42 AM
Pager_Alarm_Noise_000581.png	Image	Published	03/27/2021 1:42 AM
Radiation Pager acknowledge button	Image	Published	03/27/2021 1:42 AM
Radiation Pager acknowledge alarm	Image	Published	03/27/2021 1:42 AM
Radiation Pager move away from source	Image	Published	03/27/2021 1:42 AM
power_off_000564.png	Image	Published	03/26/2021 1:40 AM
Pager_Alarm_Mode_000575.png	Image	Published	03/27/2021 1:42 AM
RadPager Vibrate Mode Toward Source	Image	Published	03/27/2021 1:42 AM
Radiation Pager vibration	Image	Published	03/27/2021 1:42 AM
Radiation Pager Away Source Vibrate Mode	Image	Published	03/27/2021 1:42 AM

Read more about Radiation Pager Operational Test

AT6101C Operational Test Windows

Last Updated: 04/26/2025 1:37 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Atomtex AT6101C Backpack	Device	Published	06/27/2024 1:47 PM
1469 - 1401 - Establish Initial Conditions; Remark:	Procedure Step	Published	11/14/2020 4:42 PM
1468 - Note : No artificial radioactive sources should be present during the initial startu...	Annotation	Published	07/27/2022 1:16 PM
1401 - Establish Initial Conditions	Instruction	Published	09/30/2022 3:14 PM
1394 - 1393 - Verify no radioactive sources are near instrument; Remark:1392	Procedure Step	Published	11/24/2020 10:54 AM
1393 - Verify no radioactive sources are near instrument	Instruction	Published	05/25/2021 2:05 PM
1392 - Symbol - No radioactive material in immediate area	Remark	Published	09/01/2020 7:07 PM
794 - 793 - Place check sample into side pocket; Remark:791	Procedure Step	Published	05/24/2020 8:17 PM
793 - Place check sample into side pocket	Instruction	Published	10/26/2020 5:47 PM
791 - Atomtex_Place_check_sample_in_side_pocket	Remark	Published	11/08/2024 9:21 PM
1470 - 220 - Power on instrument; Remark:	Procedure Step	Published	11/14/2020 4:42 PM
1467 - Note : The BT-DU3 will power off after 10 minutes if not connected to the handheld c...	Annotation	Published	09/01/2020 7:11 PM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
1471 - 1377 - Power on BT-DU3 Adapter; Remark:1448	Procedure Step	Published	04/07/2025 12:55 PM
1377 - Power on BT-DU3 Adapter	Instruction	Published	09/30/2020 4:33 PM
1448 - Press and hold the PWR button until the yellow light is on a...	Remark	Published	09/01/2020 7:14 PM
1589 - 1495 - Power on mobile device; Remark:1569	Procedure Step	Published	04/07/2025 1:33 PM
1495 - Power on mobile device	Instruction	Published	11/12/2020 4:20 PM
1569 - Press the Power button and wait for the screen to activate. The ATAS Scanner ...	Remark	Published	11/14/2020 4:32 PM
1570 - If not ATAS does not automatically start, press F1.	Remark	Published	11/14/2020 4:33 PM
1590 - 1429 - Enter scanning file name; Remark:1571	Procedure Step	Published	07/28/2020 12:41 PM
1429 - Enter scanning file name	Instruction	Published	09/01/2020 7:26 PM
1571 - IO NautizX8 ATAS Scanning file name	Remark	Published	11/14/2020 6:35 PM
1591 - 1565 - If prompted, tap Yes to perform stabilization; Remark:1572	Procedure Step	Published	11/14/2020 4:10 PM
1466 - Note : It is recommended to perform a calibration upon startup, at least once a week...	Annotation	Published	09/01/2020 7:24 PM
1565 - If prompted, tap Yes to perform stabilization	Instruction	Published	11/14/2020 3:04 PM
1572 - Stabilization typically takes about 3 minutes.	Remark	Published	11/14/2020 3:43 PM
1592 - 612 - Wait for instrument to complete start-up sequence; Remark:1573	Procedure Step	Published	04/13/2025 6:48 PM
612 - Wait for instrument to complete start-up sequence	Instruction	Published	04/13/2025 6:38 PM
1573 - The start-up sequence may take several minutes to complete.	Remark	Published	11/14/2020 6:32 PM
1477 - 1431 - Verify system is ready; Remark:	Procedure Step	Published	09/01/2020 7:31 PM
1431 - Verify system is ready	Instruction	Published	09/01/2020 7:31 PM
1593 - 1566 - Verify backpack connection to handheld computer; Remark:1574	Procedure Step	Published	11/14/2020 4:11 PM
1566 - Verify backpack connection to handheld computer	Instruction	Published	11/14/2020 3:05 PM
1574 - SCANNING should appear in the status bar. Gamma and neutron ...	Remark	Published	11/14/2020 3:41 PM
1594 - 1433 - Verify GPS is connected; Remark:1575	Procedure Step	Published	07/28/2020 12:45 PM
1433 - Verify GPS is connected	Instruction	Published	09/01/2020 7:36 PM
1575 - The handheld computer may need to be outside for GPS to function correctly.	Remark	Published	11/14/2020 6:30 PM
1595 - 1434 - Verify the correct background mode is selected; Remark:1576	Procedure Step	Published	07/28/2020 12:46 PM
1434 - Verify the correct background mode is selected	Instruction	Published	09/01/2020 7:39 PM
1576 - Permanent background is used in most situations.	Remark	Published	11/14/2020 6:47 PM
1596 - 1435 - Check BT-DU3 battery; Remark:1577	Procedure Step	Published	07/28/2020 12:47 PM
1435 - Check BT-DU3 battery	Instruction	Published	09/01/2020 7:41 PM
1577 - Momentarily press the POWER button on the BT-DU3 to view the battery charge; ...	Remark	Published	11/14/2020 6:16 PM
1597 - 1567 - Check handheld computer battery; Remark:1578	Procedure Step	Published	11/14/2020 4:11 PM
1567 - Check handheld computer battery	Instruction	Published	11/14/2020 3:35 PM
1578 - IO NautizX8 ATAS Battery Level of PDA	Remark	Published	11/14/2020 4:08 PM
1598 - 1568 - Verify Handheld is in Function mode; Remark:1579	Procedure Step	Published	11/14/2020 4:12 PM
1568 - Verify Handheld is in Function mode	Instruction	Published	11/14/2020 3:36 PM
1579 - Fn will appear at the top of the screen.	Remark	Published	11/14/2020 4:10 PM
1580 - Press the blue button to change between function “Fn” and number “1” ...	Remark	Published	11/14/2020 3:39 PM
1483 - 1437 - Verify Response to Gamma Source; Remark:	Procedure Step	Published	09/01/2020 7:45 PM
1437 - Verify Response to Gamma Source	Instruction	Published	09/01/2020 7:45 PM
1484 - 1438 - Place gamma source next to backpack; Remark:1463	Procedure Step	Published	09/01/2020 7:47 PM
1438 - Place gamma source next to backpack	Instruction	Published	09/01/2020 7:46 PM
1463 - IO AT6101C Trefoil Move Toward Backpack	Remark	Published	09/02/2020 3:11 PM
1599 - 1439 - Verify instrument responds to radioactive source; Remark:1581	Procedure Step	Published	07/28/2020 12:50 PM
1439 - Verify instrument responds to radioactive source	Instruction	Published	06/29/2022 11:50 PM
1581 - If radioactive source activity is of high enough to trigger an alarm, ...	Remark	Published	11/14/2020 5:50 PM
1600 - 1440 - Perform identification; Remark:1582	Procedure Step	Published	07/28/2020 12:51 PM
1440 - Perform identification	Instruction	Published	09/01/2020 8:16 PM
1582 - The identification mode may start automatically after the gamma alarm. If not...	Remark	Published	11/14/2020 5:41 PM
1583 - Alternately, Tap Menu -> Scanner -> Identification to ...	Remark	Published	11/14/2020 5:40 PM
1601 - 2220 - Wait for measurement to complete; Remark:1584	Procedure Step	Published	04/20/2025 12:54 PM
2220 - Wait for measurement to complete	Instruction	Published	10/22/2020 11:15 AM
1584 - IO NautizX8 ATAS Identifying 30 Wait	Remark	Published	11/14/2020 5:38 PM
1602 - 1442 - Verify identification results are correct; Remark:1585	Procedure Step	Published	07/28/2020 12:53 PM
1442 - Verify identification results are correct	Instruction	Published	09/02/2020 3:03 PM
1585 - Identification results should match the isotopes associated with the radioact...	Remark	Published	11/14/2020 5:36 PM
1603 - 1443 - Move instrument away from gamma source of radiation when status changes to; Remark:1586	Procedure Step	Published	07/28/2020 12:54 PM
1443 - Move instrument away from gamma source of radiation when status changes to	Instruction	Published	11/14/2020 6:50 PM
1586 - IO NautizX8 ATAS Wait 15	Remark	Published	11/14/2020 5:29 PM
246 - IO No source trefoil	Remark	Published	10/07/2024 11:39 AM
1604 - 1444 - Wait for Scanning mode to resume; Remark:1587	Procedure Step	Published	07/28/2020 12:55 PM
1444 - Wait for Scanning mode to resume	Instruction	Published	09/02/2020 3:08 PM
1587 - IO NautizX8 ATAS Scanning Mode .048	Remark	Published	11/14/2020 5:27 PM
1491 - 1445 - Verify Response to Neutron Source; Remark:	Procedure Step	Published	09/02/2020 3:09 PM
1445 - Verify Response to Neutron Source	Instruction	Published	09/02/2020 3:09 PM
1492 - 1446 - Place neutron source next to backpack; Remark:1463	Procedure Step	Published	09/02/2020 3:11 PM
1446 - Place neutron source next to backpack	Instruction	Published	09/02/2020 3:11 PM
1605 - 1439 - Verify instrument responds to radioactive source; Remark:1588	Procedure Step	Published	11/14/2020 5:21 PM
1588 - If radioactive source activity is of high enough to trigger an alarm, ...	Remark	Published	11/14/2020 5:20 PM
1494 - 1447 - Move instrument away from neutron source; Remark:246	Procedure Step	Published	09/02/2020 3:19 PM
1447 - Move instrument away from neutron source	Instruction	Published	09/02/2020 3:18 PM
253 - 242 - Document and report any unresolved problems; Remark:	Procedure Step	Published	06/22/2021 10:23 AM
242 - Document and report any unresolved problems	Instruction	Published	04/21/2025 11:45 AM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
10 minutes	Duration	Published	04/01/2020 11:35 AM
Daily	Frequency	Published	04/01/2020 11:36 AM
Note	Annotation Type	Published	03/02/2020 3:25 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
No Radiation Symbol	Image	Published	08/13/2024 2:56 PM
Atomtex_Backpack_Side_Pocket_Red_Arrow_0.png	Image	Published	09/04/2020 10:44 PM
AT6101C_Partial_pocket_side_KCL Potassium check sample_Puck_red_arrow_1.png	Image	Published	09/04/2020 10:26 PM
AT6101C Full BTDU3 Location Open Front Pocket	Image	Published	09/04/2020 10:40 PM
AT6101C Partial BTDU3 Face Power Button On LED	Image	Published	09/04/2020 10:39 PM
NautizX8 Power Button on Keypad	Image	Published	09/04/2020 10:26 PM
ATAS Scanner NautizX8 Screen on start up	Image	Published	09/04/2020 10:26 PM
NautizX8_keypad_F1	Image	Published	09/04/2020 10:29 PM
NautizX8_ATAS_Win_File_Name Enter	Image	Published	03/30/2022 2:22 AM
NautizX8_ATAS_Scanner_Win_Stabilization_Request	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_screen_background_timer_red_highlight.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_screen_scanning_51nsv_red_highlight.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_GPS_screen_display.png	Image	Published	03/30/2022 2:22 AM
NautizX8_ATAS_Win_Permanent_Background_Setting	Image	Published	03/30/2022 2:22 AM
AT6101C BTDU3 Checking Battery Level Red Arrow	Image	Published	09/04/2020 10:40 PM
NautizX8_ATAS_Scanner_Battery_Level_of_BTDU_Segments	Image	Published	03/30/2022 2:22 AM
NautizX8_ATAS_Scanner_Battery_Level_of_PDA_Segments	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_screen_FN_indication.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_Keypad_blue_bar	Image	Published	09/04/2020 10:29 PM
AT6101C Full Move Source Toward Backpack	Image	Published	09/04/2020 10:40 PM
NautizX8_AT_screen_alarm_gamma_red_highlight.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_keypad_2_button	Image	Published	09/04/2020 10:34 PM
NautizX8_AT_Screen_Time_Remaining.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_screen_isotope_list.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_Screen_Waiting_15_Sec.png	Image	Published	03/30/2022 2:22 AM
NautizX8_AT_screen_scanning_mode_red_highlight.png	Image	Published	03/30/2022 2:22 AM
NautizX8 Neutron Alarm Indication Screen	Image	Published	03/30/2022 2:22 AM
NautizX8 Neutron Alarm and Gamma Alarm indications	Image	Published	03/30/2022 2:22 AM

Read more about AT6101C Operational Test Windows

AT6101C Gamma Alignment

Last Updated: 04/26/2025 1:37 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Atomtex AT6101C Backpack	Device	Published	06/27/2024 1:47 PM
1402 - 7927 - Establish Initial Conditions; Remark:	Procedure Step	Published	09/30/2022 1:47 PM
7927 - Establish Initial Conditions	Instruction	Published	07/12/2023 12:23 AM
1394 - 1393 - Verify no radioactive sources are near instrument; Remark:1392	Procedure Step	Published	11/24/2020 10:54 AM
1393 - Verify no radioactive sources are near instrument	Instruction	Published	05/25/2021 2:05 PM
1392 - Symbol - No radioactive material in immediate area	Remark	Published	09/01/2020 7:07 PM
1397 - 1396 - Verify check sample is in the side pocket; Remark:1395	Procedure Step	Published	11/24/2020 10:54 AM
1396 - Verify check sample is in the side pocket	Instruction	Published	11/24/2020 10:49 AM
1395 - Atomtex check sample in side pocket	Remark	Published	11/24/2020 9:41 AM
1400 - 1399 - Verify backpack is connected to mobile device; Remark:1398	Procedure Step	Published	11/24/2020 10:55 AM
1399 - Verify backpack is connected to mobile device	Instruction	Published	11/24/2020 10:48 AM
1398 - Scanning should appear in the status bar. Gamma and neutron values should be ...	Remark	Published	11/24/2020 9:40 AM
1404 - 1403 - Start Calibration; Remark:	Procedure Step	Published	11/24/2020 10:56 AM
1403 - Start Calibration	Instruction	Published	11/24/2020 10:47 AM
1407 - 1406 - Tap menu icon; Remark:1405	Procedure Step	Published	11/24/2020 10:56 AM
1406 - Tap menu icon	Instruction	Published	11/24/2020 10:46 AM
1405 - ATAS Menu Button	Remark	Published	11/17/2020 5:02 PM
1410 - 1409 - Tap Calibrate; Remark:1408	Procedure Step	Published	11/24/2020 10:56 AM
1409 - Tap Calibrate	Instruction	Published	11/24/2020 10:46 AM
1408 - ATAS_Calibrate_Menu_Option	Remark	Published	11/17/2020 5:01 PM
1413 - 1412 - Wait for calibration to complete; Remark:1411	Procedure Step	Published	11/24/2020 10:57 AM
1412 - Wait for calibration to complete	Instruction	Published	11/24/2020 10:45 AM
1411 - ATAS_Calibration_in_process	Remark	Published	11/17/2020 5:08 PM
1416 - 1415 - Tap OK; Remark:1414	Procedure Step	Published	11/24/2020 10:57 AM
1415 - Tap OK	Instruction	Published	11/24/2020 10:44 AM
1414 - Take note of the Gain code as it might be used for troubleshooting.	Remark	Published	11/24/2020 9:39 AM
1419 - 1418 - Enter scanning file name; Remark:1417	Procedure Step	Published	11/24/2020 10:58 AM
1418 - Enter scanning file name	Instruction	Published	09/29/2020 1:38 PM
1417 - ATAS_Scanning_File_Name	Remark	Published	11/17/2020 5:10 PM
1422 - 2220 - Wait for measurement to complete; Remark:1420	Procedure Step	Published	04/20/2025 12:51 PM
2220 - Wait for measurement to complete	Instruction	Published	10/22/2020 11:15 AM
1420 - ATAS_Background_Collection	Remark	Published	11/24/2020 9:42 AM
1425 - 1424 - Backpack radiation detector is ready for normal use; Remark:1423	Procedure Step	Published	11/24/2020 10:59 AM
1424 - Backpack radiation detector is ready for normal use	Instruction	Published	11/24/2020 10:41 AM
1423 - ATAS_Scanning_Screen	Remark	Published	11/17/2020 5:10 PM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
10 minutes	Duration	Published	04/01/2020 11:35 AM
As Needed	Frequency	Published	04/01/2020 11:36 AM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
No Radiation Symbol	Image	Published	08/13/2024 2:56 PM
Atomtex_Backpack_Side_Pocket_Red_Arrow_0.png	Image	Published	09/04/2020 10:44 PM
AT6101C_Partial_pocket_side_KCL Potassium check sample_Puck_red_arrow_1.png	Image	Published	09/04/2020 10:26 PM
ATAS_Scanning.png	Image	Published	03/30/2022 2:22 AM
ATAS_Hamburger_Menu.png	Image	Published	03/30/2022 2:22 AM
ATAS_Calibrate_Menu_Option	Image	Published	03/30/2022 2:22 AM
ATAS_Calibration_in_process	Image	Published	03/30/2022 2:22 AM
ATAS_Calibration_Complete	Image	Published	03/30/2022 2:22 AM
ATAS_Scanning_File_Name	Image	Published	03/30/2022 2:22 AM
ATAS_Collecting_Background.png	Image	Published	03/30/2022 2:22 AM
ATAS_Scanning_Screen.png	Image	Published	03/30/2022 2:22 AM

Read more about AT6101C Gamma Alignment

AT6101C BT-DU3 Replacement

Last Updated: 04/26/2025 1:37 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Atomtex AT6101C Backpack	Device	Published	06/27/2024 1:47 PM
1351 - 1350 - Remove the faulty BT-DU3 Adapter; Remark:	Procedure Step	Published	11/19/2020 6:01 PM
1350 - Remove the faulty BT-DU3 Adapter	Instruction	Published	11/19/2020 5:30 PM
1353 - 878 - Power off BT-DU3 Adapter; Remark:1348	Procedure Step	Published	04/07/2025 4:27 PM
878 - Power off BT-DU3 Adapter	Instruction	Published	05/28/2020 5:04 PM
1348 - The BT-DU3 Adapter is located in the middle compartment of the backpack. Hold...	Remark	Published	11/19/2020 5:31 PM
1356 - 1355 - Remove all detector cables from BT-DU3 Adapter; Remark:1354	Procedure Step	Published	11/19/2020 6:00 PM
1347 - Caution : Ensure the BT-DU3 adapter unit is powered off before removing or connecting d...	Annotation	Published	11/23/2020 5:29 PM
1355 - Remove all detector cables from BT-DU3 Adapter	Instruction	Published	11/19/2020 5:29 PM
1354 - To remove the push-pull type connector, hold by the collar and pull.	Remark	Published	11/19/2020 5:32 PM
1359 - 1358 - Remove BT-DU3 Adapter; Remark:1357	Procedure Step	Published	11/19/2020 5:59 PM
1358 - Remove BT-DU3 Adapter	Instruction	Published	11/19/2020 5:29 PM
1357 - Removing the BT-DU3 adapter from the AT6101C backpack	Remark	Published	11/19/2020 6:02 PM
1362 - 1361 - Record serial numbers of faulty and replacement gamma detectors; Remark:1360	Procedure Step	Published	11/19/2020 5:57 PM
1361 - Record serial numbers of faulty and replacement gamma detectors	Instruction	Published	11/19/2020 5:28 PM
1360 - Serial number on back of BT-DU3 unit	Remark	Published	11/19/2020 6:02 PM
1364 - 1363 - Install replacement BT-DU3 adapter; Remark:	Procedure Step	Published	11/19/2020 5:56 PM
1363 - Install replacement BT-DU3 adapter	Instruction	Published	11/19/2020 5:27 PM
1367 - 1366 - Place new BT-DU3 Adapter unit into backpack; Remark:1365	Procedure Step	Published	11/19/2020 5:56 PM
1366 - Place new BT-DU3 Adapter unit into backpack	Instruction	Published	11/19/2020 5:26 PM
1365 - Placing the BT-DU3 unit into the AT6101C backpack	Remark	Published	11/19/2020 6:03 PM
1371 - 1370 - Align DU cable connector with BT-DU3 Adapter connector; Remark:1368	Procedure Step	Published	11/19/2020 5:55 PM
1370 - Align DU cable connector with BT-DU3 Adapter connector	Instruction	Published	11/19/2020 5:26 PM
1368 - Red dots can be used to align the connectors.	Remark	Published	11/19/2020 5:33 PM
1369 - Connectors only fit in one orientation. Rotate the DU cable connector until i...	Remark	Published	11/19/2020 5:34 PM
1375 - 1374 - Connect DU cables to BT-DU3 Adapter; Remark:1372	Procedure Step	Published	11/19/2020 5:49 PM
1695 - Caution : Do not force the connectors together.	Annotation	Published	11/19/2020 5:54 PM
1374 - Connect DU cables to BT-DU3 Adapter	Instruction	Published	11/19/2020 5:25 PM
1372 - Push the connector to connect.	Remark	Published	11/19/2020 5:36 PM
1373 - Gamma detector connects to port 1. Neutron detector connects to port 3.	Remark	Published	11/19/2020 5:37 PM
1378 - 1377 - Power on BT-DU3 Adapter; Remark:1376	Procedure Step	Published	11/19/2020 5:48 PM
1377 - Power on BT-DU3 Adapter	Instruction	Published	09/30/2020 4:33 PM
1376 - Power Button on BT-DU3	Remark	Published	09/17/2020 10:06 AM
1381 - 1380 - Verify detectors are communicating with BT-DU3 Adapter; Remark:1379	Procedure Step	Published	11/19/2020 5:43 PM
1380 - Verify detectors are communicating with BT-DU3 Adapter	Instruction	Published	11/19/2020 5:24 PM
1379 - The DU1 and DU3 LEDs will blink rapidly.	Remark	Published	11/19/2020 5:38 PM
1384 - 1383 - Close backpack; Remark:1382	Procedure Step	Published	11/19/2020 5:43 PM
1383 - Close backpack	Instruction	Published	11/19/2020 5:23 PM
1382 - Make sure the BT-DU3 adapter unit is firmly in place and all backpack pockets...	Remark	Published	11/19/2020 5:39 PM
1387 - 319 - Perform operational test; Remark:1385	Procedure Step	Published	11/03/2022 2:53 PM
319 - Perform operational test	Instruction	Published	06/10/2021 8:31 PM
1385 - DET-HHD-ATM-RM01 AT6101C Operational Test.	Remark	Published	11/19/2020 5:40 PM
322 - 321 - Document maintenance actions; Remark:	Procedure Step	Published	06/17/2021 9:49 AM
321 - Document maintenance actions	Instruction	Published	04/21/2025 11:19 AM
2869 - 2585 - Document maintenance performed; Remark:2866	Procedure Step	Published	06/18/2021 5:58 PM
2585 - Document maintenance performed	Instruction	Published	07/09/2021 12:15 PM
2866 - Record observations, times, and results for the maintenance report.	Remark	Published	04/21/2025 11:39 AM
4706 - 4705 - Submit report; Remark:4864	Procedure Step	Published	06/29/2022 9:50 AM
4705 - Submit report	Instruction	Published	06/29/2022 9:50 AM
4864 - As specified by management or contractual obligations.	Remark	Published	07/28/2022 1:36 PM
Corrective Maintenance Procedure	Document Type	Published	03/02/2020 3:32 PM
10 minutes	Duration	Published	04/01/2020 11:35 AM
As Needed	Frequency	Published	04/01/2020 11:36 AM
Caution	Annotation Type	Published	03/02/2020 3:24 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
AT6101C Full Front Pocket	Image	Published	09/04/2020 10:26 PM
AT6101C Power Button on Controller LED on	Image	Published	09/04/2020 10:26 PM
AT6101C Connector Removal red arrows	Image	Published	09/04/2020 10:51 PM
Pulling detector cable out of BT-DU3	Image	Published	09/04/2020 10:42 PM
Remove BT-DU3 unit from AT6101C backpack	Image	Published	09/04/2020 10:42 PM
BT-DU3 Serial Number Location	Image	Published	09/04/2020 4:35 PM
BT-DU3 Serial Number.png	Image	Published	09/04/2020 10:42 PM
Placing the BT-DU3 unit into the AT6101C backpack	Image	Published	09/04/2020 10:42 PM
AT6101C_Connector_Cable_Align_Dots_red_arrow	Image	Published	09/04/2020 10:48 PM
BT-DU3 Cable Connector Tab	Image	Published	09/04/2020 10:42 PM
Attaching Detector Cables_0.png	Image	Published	09/04/2020 10:42 PM
Line up red dots to insert cable into BT-DU3 unit	Image	Published	09/04/2020 10:44 PM
Atomtex_BT-DU3_Power_Button	Image	Published	09/04/2020 10:30 PM
BT-DU3 Blinking Status Lights	Image	Published	09/04/2020 10:44 PM

Read more about AT6101C BT-DU3 Replacement

AT6101C Neutron Detector Replacement

Last Updated: 04/26/2025 1:36 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Atomtex AT6101C Backpack	Device	Published	06/27/2024 1:47 PM
879 - 878 - Power off BT-DU3 Adapter; Remark:877	Procedure Step	Published	05/28/2020 5:04 PM
878 - Power off BT-DU3 Adapter	Instruction	Published	05/28/2020 5:04 PM
877 - To power off the BT-DU3 Adapter, press the PWR button for ab...	Remark	Published	11/12/2020 6:09 PM
1729 - 1718 - Locate neutron detector; Remark:1719	Procedure Step	Published	11/20/2020 12:31 PM
1718 - Locate neutron detector	Instruction	Published	11/18/2020 8:39 PM
1719 - The neutron detector should be located in the backpack compartment closest to...	Remark	Published	11/18/2020 8:41 PM
1730 - 1717 - Remove neutron detector; Remark:	Procedure Step	Published	11/30/2020 10:11 AM
1717 - Remove neutron detector	Instruction	Published	11/30/2020 10:09 AM
1731 - 1716 - Expose neutron detector cable connection; Remark:1720	Procedure Step	Published	11/24/2020 9:10 AM
1716 - Expose neutron detector cable connection	Instruction	Published	11/30/2020 10:08 AM
1720 - The connector can be accessed by partially removing the neutron detector from...	Remark	Published	11/23/2020 4:53 PM
1732 - 1715 - Remove adapter cable from BDKN-05 neutron detector; Remark:1721	Procedure Step	Published	11/24/2020 9:11 AM
1694 - Caution : Ensure the BT-DU3 adapter unit is powered off before removing or connecting d...	Annotation	Published	11/23/2020 5:30 PM
1715 - Remove adapter cable from BDKN-05 neutron detector	Instruction	Published	11/30/2020 10:07 AM
1721 - To remove the push-pull type connector, hold the connector by the collar only...	Remark	Published	11/23/2020 4:54 PM
1733 - 1714 - Completely remove neutron detector; Remark:1723	Procedure Step	Published	11/30/2020 10:12 AM
1714 - Completely remove neutron detector	Instruction	Published	11/30/2020 10:06 AM
1723 - IO AT6101C Neutron Detector Remove red arrow	Remark	Published	11/30/2020 9:57 AM
1734 - 1713 - Record serial numbers of faulty and replacement neutron detectors; Remark:1722	Procedure Step	Published	11/30/2020 10:13 AM
1713 - Record serial numbers of faulty and replacement neutron detectors	Instruction	Published	11/30/2020 10:05 AM
1722 - IO AT6101C Neutron Detector Serial Number	Remark	Published	11/30/2020 9:57 AM
1735 - 1712 - Install replacement neutron detector; Remark:	Procedure Step	Published	11/30/2020 10:13 AM
1712 - Install replacement neutron detector	Instruction	Published	11/30/2020 10:04 AM
1736 - 1711 - Set neutron detector partially into backpack; Remark:1724	Procedure Step	Published	11/30/2020 10:13 AM
1711 - Set neutron detector partially into backpack	Instruction	Published	11/30/2020 10:03 AM
1724 - This will allow the adapter cable to be reconnected	Remark	Published	11/30/2020 9:56 AM
1737 - 1679 - Align connector of adapter cable with detector connector; Remark:1686	Procedure Step	Published	11/24/2020 9:11 AM
1679 - Align connector of adapter cable with detector connector	Instruction	Published	11/29/2020 11:14 AM
1686 - Connectors only fit in one orientation. Gently rotate the DU cable connector ...	Remark	Published	11/23/2020 4:51 PM
1738 - 1710 - Connect cable to BDKN-05 neutron detector; Remark:1725	Procedure Step	Published	11/24/2020 9:11 AM
1695 - Caution : Do not force the connectors together.	Annotation	Published	11/19/2020 5:54 PM
1710 - Connect cable to BDKN-05 neutron detector	Instruction	Published	11/23/2020 4:57 PM
1725 - For the push-pull type, grip the back of the connector behind the collar to r...	Remark	Published	11/23/2020 4:55 PM
1739 - 1709 - Place neutron detector in backpack; Remark:1726	Procedure Step	Published	11/24/2020 9:12 AM
1709 - Place neutron detector in backpack	Instruction	Published	11/23/2020 4:56 PM
1726 - IO AT6101C Neutron Detector Install red arrow	Remark	Published	11/23/2020 4:55 PM
1704 - 1634 - Verify system is operating correctly; Remark:	Procedure Step	Published	11/24/2020 9:12 AM
1634 - Verify system is operating correctly	Instruction	Published	11/29/2020 11:16 AM
1378 - 1377 - Power on BT-DU3 Adapter; Remark:1376	Procedure Step	Published	11/19/2020 5:48 PM
1377 - Power on BT-DU3 Adapter	Instruction	Published	09/30/2020 4:33 PM
1376 - Power Button on BT-DU3	Remark	Published	09/17/2020 10:06 AM
1740 - 1708 - Verify neutron detector is connected to BT-DU3; Remark:1727	Procedure Step	Published	11/30/2020 10:14 AM
1708 - Verify neutron detector is connected to BT-DU3	Instruction	Published	11/30/2020 10:01 AM
1727 - The DU3 LED will be blinking rapidly.	Remark	Published	11/30/2020 9:53 AM
1706 - 319 - Perform operational test; Remark:1385	Procedure Step	Published	11/29/2020 11:34 AM
319 - Perform operational test	Instruction	Published	06/10/2021 8:31 PM
1385 - DET-HHD-ATM-RM01 AT6101C Operational Test.	Remark	Published	11/19/2020 5:40 PM
1741 - 1682 - Tag suspect part with fault information; Remark:1728	Procedure Step	Published	11/30/2020 10:15 AM
1682 - Tag suspect part with fault information	Instruction	Published	11/29/2020 11:19 AM
1728 - Dispose of the faulty BDKN-05 neutron detector per organizational and local j...	Remark	Published	11/30/2020 9:52 AM
322 - 321 - Document maintenance actions; Remark:	Procedure Step	Published	06/17/2021 9:49 AM
321 - Document maintenance actions	Instruction	Published	04/21/2025 11:19 AM
2869 - 2585 - Document maintenance performed; Remark:2866	Procedure Step	Published	06/18/2021 5:58 PM
2585 - Document maintenance performed	Instruction	Published	07/09/2021 12:15 PM
2866 - Record observations, times, and results for the maintenance report.	Remark	Published	04/21/2025 11:39 AM
4706 - 4705 - Submit report; Remark:4864	Procedure Step	Published	06/29/2022 9:50 AM
4705 - Submit report	Instruction	Published	06/29/2022 9:50 AM
4864 - As specified by management or contractual obligations.	Remark	Published	07/28/2022 1:36 PM
Corrective Maintenance Procedure	Document Type	Published	03/02/2020 3:32 PM
15 minutes	Duration	Published	04/01/2020 11:35 AM
As Needed	Frequency	Published	04/01/2020 11:36 AM
Caution	Annotation Type	Published	03/02/2020 3:24 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
Atomtex_BT-DU3_Power_Button	Image	Published	09/04/2020 10:30 PM
AT6101C_Partial_Neutron_Detector_red_box	Image	Published	09/04/2020 10:48 PM
AT6101C_Partial_Neutron_Connector_Location_red_arrow	Image	Published	09/04/2020 10:48 PM
AT6101C_Neutron_Connector_Remove_red_arrows	Image	Published	09/04/2020 10:48 PM
AT6101C_Partial_Neutron_Remove_red_arrow	Image	Published	09/04/2020 10:48 PM
AT6101C_Neutron_Serial_Number_Location	Image	Published	09/04/2020 5:06 PM
AT6101C_Neutron_Serial_Number_0.png	Image	Published	09/04/2020 10:48 PM
at6101C_Neutron_Remove_DU	Image	Published	09/04/2020 10:48 PM
BT-DU3 Cable Connector Tab	Image	Published	09/04/2020 10:42 PM
AT6101C_Neutron_Connector_Install_red_arrows	Image	Published	09/04/2020 10:48 PM
AT6101C_Partial_Neutron_Install	Image	Published	09/04/2020 10:47 PM
AT6101C_BTDU3_LED_DU3_red_circle	Image	Published	09/04/2020 10:47 PM

Read more about AT6101C Neutron Detector Replacement

AT6101C Gamma Detector Replacement

Last Updated: 04/26/2025 1:36 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Atomtex AT6101C Backpack	Device	Published	06/27/2024 1:47 PM
879 - 878 - Power off BT-DU3 Adapter; Remark:877	Procedure Step	Published	05/28/2020 5:04 PM
878 - Power off BT-DU3 Adapter	Instruction	Published	05/28/2020 5:04 PM
877 - To power off the BT-DU3 Adapter, press the PWR button for ab...	Remark	Published	11/12/2020 6:09 PM
1693 - 1672 - Locate gamma detector; Remark:1692	Procedure Step	Published	11/20/2020 12:27 PM
1672 - Locate gamma detector	Instruction	Published	11/18/2020 8:03 PM
1692 - The gamma detector should be located in the backpack compartment closest to t...	Remark	Published	11/18/2020 8:05 PM
1696 - 1673 - Remove gamma detector; Remark:	Procedure Step	Published	11/29/2020 11:28 AM
1673 - Remove gamma detector	Instruction	Published	12/09/2022 1:34 PM
1697 - 1674 - Remove adapter cable from gamma detector; Remark:1691	Procedure Step	Published	11/29/2020 11:28 AM
1694 - Caution : Ensure the BT-DU3 adapter unit is powered off before removing or connecting d...	Annotation	Published	11/23/2020 5:30 PM
1674 - Remove adapter cable from gamma detector	Instruction	Published	11/23/2020 5:01 PM
1691 - To remove the push-pull type connector, hold the connector by the collar only...	Remark	Published	11/23/2020 4:49 PM
1698 - 1675 - Remove gamma detector from backpack; Remark:1690	Procedure Step	Published	11/29/2020 11:29 AM
1675 - Remove gamma detector from backpack	Instruction	Published	11/29/2020 11:11 AM
1690 - IO AT6101C Gamma Detector Remove red arrow	Remark	Published	11/29/2020 11:25 AM
1699 - 1676 - Record serial numbers of faulty and replacement gamma detectors; Remark:1689	Procedure Step	Published	11/29/2020 11:30 AM
1676 - Record serial numbers of faulty and replacement gamma detectors	Instruction	Published	11/29/2020 11:12 AM
1689 - IO AT6101C Gamma Detector Serial Number	Remark	Published	11/29/2020 11:24 AM
1700 - 1677 - Install replacement gamma detector; Remark:	Procedure Step	Published	11/29/2020 11:31 AM
1677 - Install replacement gamma detector	Instruction	Published	11/29/2020 11:20 AM
1701 - 1678 - Slide gamma detector into backpack; Remark:1688	Procedure Step	Published	11/29/2020 11:32 AM
1678 - Slide gamma detector into backpack	Instruction	Published	11/29/2020 11:13 AM
1688 - IO AT6101C Gamma Detector Install red arrow	Remark	Published	11/23/2020 4:50 PM
1702 - 1679 - Align connector of adapter cable with detector connector; Remark:1687	Procedure Step	Published	11/24/2020 9:09 AM
1679 - Align connector of adapter cable with detector connector	Instruction	Published	11/29/2020 11:14 AM
1687 - There may be red dots that can be used to align the connectors.	Remark	Published	11/29/2020 11:51 AM
1686 - Connectors only fit in one orientation. Gently rotate the DU cable connector ...	Remark	Published	11/23/2020 4:51 PM
1703 - 1680 - Connect cable to BDKG-11M gamma detector; Remark:1685	Procedure Step	Published	11/24/2020 9:10 AM
1695 - Caution : Do not force the connectors together.	Annotation	Published	11/19/2020 5:54 PM
1680 - Connect cable to BDKG-11M gamma detector	Instruction	Published	11/23/2020 4:59 PM
1685 - For the push-pull type, grip the back of the connector behind the collar to r...	Remark	Published	11/23/2020 4:52 PM
1704 - 1634 - Verify system is operating correctly; Remark:	Procedure Step	Published	11/24/2020 9:12 AM
1634 - Verify system is operating correctly	Instruction	Published	11/29/2020 11:16 AM
1378 - 1377 - Power on BT-DU3 Adapter; Remark:1376	Procedure Step	Published	11/19/2020 5:48 PM
1377 - Power on BT-DU3 Adapter	Instruction	Published	09/30/2020 4:33 PM
1376 - Power Button on BT-DU3	Remark	Published	09/17/2020 10:06 AM
1705 - 1681 - Verify gamma detector is connected to BT-DU3; Remark:1684	Procedure Step	Published	11/29/2020 11:33 AM
1681 - Verify gamma detector is connected to BT-DU3	Instruction	Published	11/29/2020 11:17 AM
1684 - The D1 LED will be blinking rapidly.	Remark	Published	11/29/2020 11:23 AM
1706 - 319 - Perform operational test; Remark:1385	Procedure Step	Published	11/29/2020 11:34 AM
319 - Perform operational test	Instruction	Published	06/10/2021 8:31 PM
1385 - DET-HHD-ATM-RM01 AT6101C Operational Test.	Remark	Published	11/19/2020 5:40 PM
1707 - 1682 - Tag suspect part with fault information; Remark:1683	Procedure Step	Published	11/29/2020 11:35 AM
1682 - Tag suspect part with fault information	Instruction	Published	11/29/2020 11:19 AM
1683 - Dispose of the faulty BDKG-11M per organizational and local jurisdiction requ...	Remark	Published	11/29/2020 11:52 AM
322 - 321 - Document maintenance actions; Remark:	Procedure Step	Published	06/17/2021 9:49 AM
321 - Document maintenance actions	Instruction	Published	04/21/2025 11:19 AM
2869 - 2585 - Document maintenance performed; Remark:2866	Procedure Step	Published	06/18/2021 5:58 PM
2585 - Document maintenance performed	Instruction	Published	07/09/2021 12:15 PM
2866 - Record observations, times, and results for the maintenance report.	Remark	Published	04/21/2025 11:39 AM
4706 - 4705 - Submit report; Remark:4864	Procedure Step	Published	06/29/2022 9:50 AM
4705 - Submit report	Instruction	Published	06/29/2022 9:50 AM
4864 - As specified by management or contractual obligations.	Remark	Published	07/28/2022 1:36 PM
Corrective Maintenance Procedure	Document Type	Published	03/02/2020 3:32 PM
15 minutes	Duration	Published	04/01/2020 11:35 AM
As Needed	Frequency	Published	04/01/2020 11:36 AM
Caution	Annotation Type	Published	03/02/2020 3:24 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
None	Tools	Published	05/06/2020 9:50 PM
Atomtex_BT-DU3_Power_Button	Image	Published	09/04/2020 10:30 PM
AT6101C_Gamma_red_circle_0.png	Image	Published	09/04/2020 10:51 PM
AT6101C Connector Removal red arrows	Image	Published	09/04/2020 10:51 PM
AT6101C_Gamma_Detector_Remove_red_arrow	Image	Published	09/04/2020 10:49 PM
AT6101C_Gamma_Serial_Number_Location	Image	Published	09/04/2020 10:21 PM
AT6101C_Gamma_Serial_Number_0.png	Image	Published	09/04/2020 10:49 PM
AT6101C_Gamma_Detector_Install_red_arrow	Image	Published	09/04/2020 10:48 PM
AT6101C_Connector_Cable_Align_Dots_red_arrow	Image	Published	09/04/2020 10:48 PM
BT-DU3 Cable Connector Tab	Image	Published	09/04/2020 10:42 PM
Attaching Detector Cables_0.png	Image	Published	09/04/2020 10:42 PM
AT6101C_BTDU3_LED_DU1_red_circle	Image	Published	09/04/2020 10:48 PM

Read more about AT6101C Gamma Detector Replacement

Subscribe to None