| 5524 |
5524 - IO RadSeeker Re-Insert Gamma Detector Assembly |
Remark |
5526 - 5525 - Reinsert gamma detector assembly; Remark:5524 |
STEP: 5526 - 5525 - Reinsert gamma detector assembly; Remark:5524
RadSeeker Check Connections
|
✔ |
| 5525 |
5525 - Reinsert gamma detector assembly |
Instruction |
5526 - 5525 - Reinsert gamma detector assembly; Remark:5524 |
STEP: 5526 - 5525 - Reinsert gamma detector assembly; Remark:5524
RadSeeker Check Connections
|
✔ |
| 5526 |
5526 - 5525 - Reinsert gamma detector assembly; Remark:5524 |
Procedure Step |
|
|
✔ |
| 5527 |
5527 - 5481 - Reseat mounting tab; Remark:5480 |
Procedure Step |
|
|
✔ |
| 5528 |
5528 - 5523 - Replace four (4) gamma detector mounting screws; Remark:5521 |
Procedure Step |
|
|
✔ |
| 5529 |
5529 - 5520 - Replace three (3) MCA mounting screws; Remark:5474 |
Procedure Step |
|
|
✔ |
| 5530 |
5530 - IO RadSeeker Connect MCA Stabilization Modules |
Remark |
5429 - 5426 - Connect MCA to stabilization module; Remark:5530 |
STEP: 5429 - 5426 - Connect MCA to stabilization module; Remark:5530
RadSeeker Stabilization Module Replacement
|
✔ |
| 5531 |
5531 - IO RadSeeker Disconnect MCA Stabilization Modules |
Remark |
5400 - 5396 - Disconnect the MCA [multi-channel analyzer] cable connector from the stabiliz...; Remark:5531 |
STEP: 5400 - 5396 - Disconnect the MCA [multi-channel analyzer] cable connector from the stabiliz...; Remark:5531
RadSeeker Stabilization Module Replacement
|
✔ |
| 5532 |
5532 - IO RadSeeker Styrofoam Top Half Install |
Remark |
5487 - 5479 - Place top half of Styrofoam casing on detector; Remark:5532 |
|
✔ |
| 5533 |
5533 - IO RadSeeker Cable Tie for Gamma Assembly |
Remark |
5469 - 5468 - Insert new cable ties through black plastic supports; Remark:5533 |
|
✔ |
| 5534 |
5534 - Insert screws through SOM assembly and spacers. On the underside of the proce... |
Remark |
5542 - 5453 - Replace two (2) mounting screws; Remark:5534 |
STEP: 5542 - 5453 - Replace two (2) mounting screws; Remark:5534
RadSeeker Check Connections
|
✔ |
| 5535 |
5535 - IO RadSeeker Remove SOM Two Screws and IO RadSeeker Remove Two Nuts |
Remark |
5542 - 5453 - Replace two (2) mounting screws; Remark:5534 |
STEP: 5542 - 5453 - Replace two (2) mounting screws; Remark:5534
RadSeeker Check Connections
|
✔ |
| 5536 |
5536 - Use tweezers to position spacers under SOM module. |
Remark |
5541 - 5537 - Replace two (2) spacers; Remark:5536 |
STEP: 5541 - 5537 - Replace two (2) spacers; Remark:5536
RadSeeker Check Connections
|
✔ |
| 5537 |
5537 - Replace two (2) spacers |
Instruction |
5541 - 5537 - Replace two (2) spacers; Remark:5536 |
STEP: 5541 - 5537 - Replace two (2) spacers; Remark:5536
RadSeeker Check Connections
|
✔ |
| 5538 |
5538 - Align SOM assembly over processor PCB sockets and connect the components usin... |
Remark |
5540 - 5539 - Reseat SOM Assembly; Remark:5538 |
STEP: 5540 - 5539 - Reseat SOM Assembly; Remark:5538
RadSeeker Check Connections
|
✔ |
| 5539 |
5539 - Reseat SOM Assembly |
Instruction |
5540 - 5539 - Reseat SOM Assembly; Remark:5538 |
STEP: 5540 - 5539 - Reseat SOM Assembly; Remark:5538
RadSeeker Check Connections
|
✔ |
| 5540 |
5540 - 5539 - Reseat SOM Assembly; Remark:5538 |
Procedure Step |
|
|
✔ |
| 5541 |
5541 - 5537 - Replace two (2) spacers; Remark:5536 |
Procedure Step |
|
|
✔ |
| 5542 |
5542 - 5453 - Replace two (2) mounting screws; Remark:5534 |
Procedure Step |
|
|
✔ |
| 5543 |
5543 - Push connector directly toward circuit board. |
Remark |
5557 - 5544 - Reconnect Wi-Fi cable; Remark:5543 |
STEP: 5557 - 5544 - Reconnect Wi-Fi cable; Remark:5543
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5544 |
5544 - Reconnect Wi-Fi cable |
Instruction |
5557 - 5544 - Reconnect Wi-Fi cable; Remark:5543 |
STEP: 5557 - 5544 - Reconnect Wi-Fi cable; Remark:5543
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5545 |
5545 - Use very small Phillips (PH0) screwdriver. |
Remark |
5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545 |
STEP: 5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5546 |
5546 - IO RadSeeker USB Dust Cover Screws |
Remark |
5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545 |
STEP: 5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5547 |
5547 - Replace two (2) USB dust cover screws |
Instruction |
5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545 |
STEP: 5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5548 |
5548 - Standard : Torque USB dust cover screws to 1.6 in-lbs |
Annotation |
5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545 |
STEP: 5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5549 |
5549 - Fit USB interface into chassis cutout, then lower in processor PCB. |
Remark |
5555 - 5550 - Insert processor PCB; Remark:5549 |
STEP: 5555 - 5550 - Insert processor PCB; Remark:5549
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5550 |
5550 - Insert processor PCB |
Instruction |
5555 - 5550 - Insert processor PCB; Remark:5549 |
STEP: 5555 - 5550 - Insert processor PCB; Remark:5549
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5551 |
5551 - IO RadSeeker Install Connectors From Circuit Board |
Remark |
5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551 |
STEP: 5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5552 |
5552 - Reconnect five (5) cables to underside of processor PCB |
Instruction |
5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551 |
STEP: 5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5553 |
5553 - Caution : Correct placement of connectors and wiring is critical to proper operation. |
Annotation |
5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551
5739 - 5723 - Zkontrolujte připojení; Remark:5722
5826 - 5811 - Znovu připojte vidlicové konektory z baterie k vnitřní desce; Remark:5810
6117 - 6116 - Reconnect two (2) cables; Remark:6115
6148 - 6147 - Connect cable; Remark:6146
8327 - 8320 - Reconnect BNC and MHV cables; Remark:8319
8404 - 8402 - Connect speed output wire to B+ terminal; Remark:8401
8578 - 8543 - Reconnect cable to He3 tube; Remark:8544
8587 - 7305 - Enable both infrared occupancy sensors; Remark:8559
8588 - 7305 - Enable both infrared occupancy sensors; Remark:8559
8647 - 8661 - Reconnect applicable cable previously removed in Step 4-4; Remark:8559 |
STEP: 5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
STEP: 5739 - 5723 - Zkontrolujte připojení; Remark:5722
PackEye Refurbish Power Supply
STEP: 5826 - 5811 - Znovu připojte vidlicové konektory z baterie k vnitřní desce; Remark:5810
PackEye Reseat Power Supply Connections
STEP: 6117 - 6116 - Reconnect two (2) cables; Remark:6115
VeriFinder Stabilization Module Replacement
STEP: 6148 - 6147 - Connect cable; Remark:6146
VeriFinder Stabilization Module Replacement
STEP: 8327 - 8320 - Reconnect BNC and MHV cables; Remark:8319
RPM Gamma Detector Replacement
STEP: 8404 - 8402 - Connect speed output wire to B+ terminal; Remark:8401
RPM ThetaController Installation
STEP: 8578 - 8543 - Reconnect cable to He3 tube; Remark:8544
RPM Neutron Detector Helium-3 (He3) Tube Replacement
STEP: 8587 - 7305 - Enable both infrared occupancy sensors; Remark:8559
RPM LD-260 Load Disconnect Replacement
RPM Ethernet-to-Fiber Media Converter Replacement
RPM IXIO-DT1 Occupancy Sensor Replacement
RPM SCA-774 Single Channel Analyzer Board Replacement
RPM SCA-775 Module Replacement
RPM LD-260 Load Disconnect Fuse Replacement
RPM SC-771 Controller Board Replacement
RPM SC-770 Controller Module Replacement
RPM Banner IR Occupancy Sensor Replacement
RPM Nano Controller Replacement
RPM SPY-2 to IXIO-DT1 Occupancy Sensor Conversion
RPM Neutron Signal Pick-Off Box (PMFX) Replacement
RPM VD-580 Replacement
STEP: 8588 - 7305 - Enable both infrared occupancy sensors; Remark:8559
RPM Neutron Detector Helium-3 (He3) Tube Replacement
RPM RS232 to RS485 Converter Replacement
|
✔ |
| 5554 |
5554 - 5552 - Reconnect five (5) cables to underside of processor PCB; Remark:5551 |
Procedure Step |
|
|
✔ |
| 5555 |
5555 - 5550 - Insert processor PCB; Remark:5549 |
Procedure Step |
|
|
✔ |
| 5556 |
5556 - 5547 - Replace two (2) USB dust cover screws; Remark:5545 |
Procedure Step |
|
|
✔ |
| 5557 |
5557 - 5544 - Reconnect Wi-Fi cable; Remark:5543 |
Procedure Step |
|
|
✔ |
| 5558 |
5558 - Avoid damage to the internal O-ring. |
Remark |
5566 - 5560 - Replace bottom cover; Remark:5558 |
STEP: 5566 - 5560 - Replace bottom cover; Remark:5558
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5559 |
5559 - Enclosures should fit snugly together. |
Remark |
5566 - 5560 - Replace bottom cover; Remark:5558 |
STEP: 5566 - 5560 - Replace bottom cover; Remark:5558
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5560 |
5560 - Replace bottom cover |
Instruction |
5566 - 5560 - Replace bottom cover; Remark:5558 |
STEP: 5566 - 5560 - Replace bottom cover; Remark:5558
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5561 |
5561 - Caution : Verify the silicone tube O-ring does not become pinched or d... |
Annotation |
5566 - 5560 - Replace bottom cover; Remark:5558 |
STEP: 5566 - 5560 - Replace bottom cover; Remark:5558
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5562 |
5562 - Connector should click securely into place. |
Remark |
5565 - 5564 - Reconnect beeper cable; Remark:5562 |
STEP: 5565 - 5564 - Reconnect beeper cable; Remark:5562
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5563 |
5563 - IO RadSeeker Install Beeper Cable |
Remark |
5565 - 5564 - Reconnect beeper cable; Remark:5562 |
STEP: 5565 - 5564 - Reconnect beeper cable; Remark:5562
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5564 |
5564 - Reconnect beeper cable |
Instruction |
5565 - 5564 - Reconnect beeper cable; Remark:5562 |
STEP: 5565 - 5564 - Reconnect beeper cable; Remark:5562
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5565 |
5565 - 5564 - Reconnect beeper cable; Remark:5562 |
Procedure Step |
|
|
✔ |
| 5566 |
5566 - 5560 - Replace bottom cover; Remark:5558 |
Procedure Step |
|
|
✔ |
| 5567 |
5567 - If available, use torque screwdriver set to 7 in-lbs. with medium Phillips (P... |
Remark |
5571 - 5569 - Replace six (6) enclosure screws; Remark:5567 |
STEP: 5571 - 5569 - Replace six (6) enclosure screws; Remark:5567
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5568 |
5568 - IO RadSeeker Underside Enclosure Screws |
Remark |
5571 - 5569 - Replace six (6) enclosure screws; Remark:5567 |
STEP: 5571 - 5569 - Replace six (6) enclosure screws; Remark:5567
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5569 |
5569 - Replace six (6) enclosure screws |
Instruction |
5571 - 5569 - Replace six (6) enclosure screws; Remark:5567 |
STEP: 5571 - 5569 - Replace six (6) enclosure screws; Remark:5567
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5570 |
5570 - Standard : Torque screws to 7 in-lbs. |
Annotation |
5571 - 5569 - Replace six (6) enclosure screws; Remark:5567 |
STEP: 5571 - 5569 - Replace six (6) enclosure screws; Remark:5567
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5571 |
5571 - 5569 - Replace six (6) enclosure screws; Remark:5567 |
Procedure Step |
|
|
✔ |
| 5572 |
5572 - Each foot and matching bumper should have identifying marks. |
Remark |
5574 - 5573 - Verify bumpers are positioned correctly.; Remark:5572 |
STEP: 5574 - 5573 - Verify bumpers are positioned correctly.; Remark:5572
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5573 |
5573 - Verify bumpers are positioned correctly. |
Instruction |
5574 - 5573 - Verify bumpers are positioned correctly.; Remark:5572 |
STEP: 5574 - 5573 - Verify bumpers are positioned correctly.; Remark:5572
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5574 |
5574 - 5573 - Verify bumpers are positioned correctly.; Remark:5572 |
Procedure Step |
|
|
✔ |
| 5575 |
5575 - Use small Phillips (PH1) screwdriver. Each bumper contains two (2) screws for... |
Remark |
5577 - 5576 - Tighten eight (8) bumper screws; Remark:5575 |
STEP: 5577 - 5576 - Tighten eight (8) bumper screws; Remark:5575
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5576 |
5576 - Tighten eight (8) bumper screws |
Instruction |
5577 - 5576 - Tighten eight (8) bumper screws; Remark:5575 |
STEP: 5577 - 5576 - Tighten eight (8) bumper screws; Remark:5575
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5577 |
5577 - 5576 - Tighten eight (8) bumper screws; Remark:5575 |
Procedure Step |
|
|
✔ |
| 5578 |
5578 - Unclasp battery latch. Open battery latch. Reinsert battery. |
Remark |
5580 - 10484 - Insert battery pack; Remark:5578 |
STEP: 5580 - 10484 - Insert battery pack; Remark:5578
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5579 |
5579 - IO Orient polarity indicators downward. |
Remark |
5580 - 10484 - Insert battery pack; Remark:5578 |
STEP: 5580 - 10484 - Insert battery pack; Remark:5578
RadSeeker Check Connections
RadSeeker Stabilization Module Replacement
|
✔ |
| 5580 |
5580 - 10484 - Insert battery pack; Remark:5578 |
Procedure Step |
|
|
✔ |
| 5581 |
5581 - If the computer cannot connect with the RadSeeker, refer to DET-HHD-SMD-OP04,... |
Remark |
3722 - 3635 - Wait for Detector Controller to open; Remark:3652 |
STEP: 3722 - 3635 - Wait for Detector Controller to open; Remark:3652
RadSeeker Upload and Attach with RAVEN
RadSeeker Upload and Attach with Schneider
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5582 |
5582 - IO RadSeeker PCB Internal Battery |
Remark |
4788 - 4787 - Disassemble instrument to access internal battery; Remark:4789 |
STEP: 4788 - 4787 - Disassemble instrument to access internal battery; Remark:4789
RadSeeker Internal Battery Replacement
|
✔ |
| 5583 |
5583 - IO RadSeeker PCB Battery Circled |
Remark |
4788 - 4787 - Disassemble instrument to access internal battery; Remark:4789 |
STEP: 4788 - 4787 - Disassemble instrument to access internal battery; Remark:4789
RadSeeker Internal Battery Replacement
|
✔ |
| 5584 |
5584 - Verify Wi-Fi Status |
Instruction |
5585 - 5584 - Verify Wi-Fi Status; Remark: |
STEP: 5585 - 5584 - Verify Wi-Fi Status; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5585 |
5585 - 5584 - Verify Wi-Fi Status; Remark: |
Procedure Step |
|
|
✔ |
| 5586 |
5586 - Transfer Edited service.xml File |
Instruction |
5587 - 5586 - Transfer Edited service.xml File; Remark: |
STEP: 5587 - 5586 - Transfer Edited service.xml File; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5587 |
5587 - 5586 - Transfer Edited service.xml File; Remark: |
Procedure Step |
|
|
✔ |
| 5588 |
5588 - Edit Configuration File |
Instruction |
5589 - 5588 - Edit Configuration File; Remark: |
STEP: 5589 - 5588 - Edit Configuration File; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5589 |
5589 - 5588 - Edit Configuration File; Remark: |
Procedure Step |
|
|
✔ |
| 5590 |
5590 - Move Configuration File to Computer |
Instruction |
5591 - 5590 - Move Configuration File to Computer; Remark: |
STEP: 5591 - 5590 - Move Configuration File to Computer; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5591 |
5591 - 5590 - Move Configuration File to Computer; Remark: |
Procedure Step |
|
|
✔ |
| 5592 |
5592 - Enter Service Mode |
Instruction |
5593 - 5592 - Enter Service Mode; Remark:
5916 - 5592 - Enter Service Mode; Remark:5909 |
STEP: 5593 - 5592 - Enter Service Mode; Remark:
RadSeeker CS/CL Wi-Fi Status Change
STEP: 5916 - 5592 - Enter Service Mode; Remark:5909
RadSeeker Calibration
|
✔ |
| 5593 |
5593 - 5592 - Enter Service Mode; Remark: |
Procedure Step |
|
|
✔ |
| 5594 |
5594 - Establish Connection between Computer and RadSeeker |
Instruction |
5595 - 5594 - Establish Connection between Computer and RadSeeker; Remark: |
STEP: 5595 - 5594 - Establish Connection between Computer and RadSeeker; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5595 |
5595 - 5594 - Establish Connection between Computer and RadSeeker; Remark: |
Procedure Step |
|
|
✔ |
| 5596 |
5596 - Verify computer is powered on |
Instruction |
5600 - 5596 - Verify computer is powered on; Remark: |
STEP: 5600 - 5596 - Verify computer is powered on; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5597 |
5597 - Password is serial number specific. Obtain from Nuclear Smuggling Detection a... |
Remark |
5599 - 5598 - Obtain Service Mode password for unit; Remark:5597 |
STEP: 5599 - 5598 - Obtain Service Mode password for unit; Remark:5597
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5598 |
5598 - Obtain Service Mode password for unit |
Instruction |
5599 - 5598 - Obtain Service Mode password for unit; Remark:5597 |
STEP: 5599 - 5598 - Obtain Service Mode password for unit; Remark:5597
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5599 |
5599 - 5598 - Obtain Service Mode password for unit; Remark:5597 |
Procedure Step |
|
|
✔ |
| 5600 |
5600 - 5596 - Verify computer is powered on; Remark: |
Procedure Step |
|
|
✔ |
| 5602 |
5602 - Close Detector Controller software |
Instruction |
5606 - 5602 - Close Detector Controller software; Remark:3656
5614 - 5602 - Close Detector Controller software; Remark:3656 |
STEP: 5606 - 5602 - Close Detector Controller software; Remark:3656
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5603 |
5603 - Icon at the top right of the screen indicates Wi-Fi status. |
Remark |
5605 - 5604 - Confirm settings change; Remark:5603 |
STEP: 5605 - 5604 - Confirm settings change; Remark:5603
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5604 |
5604 - Confirm settings change |
Instruction |
5605 - 5604 - Confirm settings change; Remark:5603 |
STEP: 5605 - 5604 - Confirm settings change; Remark:5603
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5605 |
5605 - 5604 - Confirm settings change; Remark:5603 |
Procedure Step |
|
|
✔ |
| 5606 |
5606 - 5602 - Close Detector Controller software; Remark:3656 |
Procedure Step |
|
|
✔ |
| 5607 |
5607 - This will overwrite the version on the RadSeeker. |
Remark |
5613 - 5608 - Click green arrow to initiate transfer from computer to RadSeeker; Remark:5607 |
STEP: 5613 - 5608 - Click green arrow to initiate transfer from computer to RadSeeker; Remark:5607
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5608 |
5608 - Click green arrow to initiate transfer from computer to RadSeeker |
Instruction |
5613 - 5608 - Click green arrow to initiate transfer from computer to RadSeeker; Remark:5607 |
STEP: 5613 - 5608 - Click green arrow to initiate transfer from computer to RadSeeker; Remark:5607
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5609 |
5609 - Select service.xml on computer |
Instruction |
5612 - 5609 - Select service.xml on computer; Remark:5654 |
STEP: 5612 - 5609 - Select service.xml on computer; Remark:5654
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5610 |
5610 - Return to Detector Controller software |
Instruction |
5611 - 5610 - Return to Detector Controller software; Remark: |
STEP: 5611 - 5610 - Return to Detector Controller software; Remark:
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5611 |
5611 - 5610 - Return to Detector Controller software; Remark: |
Procedure Step |
|
|
✔ |
| 5612 |
5612 - 5609 - Select service.xml on computer; Remark:5654 |
Procedure Step |
|
|
✔ |
| 5613 |
5613 - 5608 - Click green arrow to initiate transfer from computer to RadSeeker; Remark:5607 |
Procedure Step |
|
|
✔ |
| 5614 |
5614 - 5602 - Close Detector Controller software; Remark:3656 |
Procedure Step |
|
|
✔ |
| 5615 |
5615 - Click File and then click Save. |
Remark |
5627 - 5616 - Save file service.xml; Remark:5615 |
STEP: 5627 - 5616 - Save file service.xml; Remark:5615
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5616 |
5616 - Save file service.xml |
Instruction |
5627 - 5616 - Save file service.xml; Remark:5615 |
STEP: 5627 - 5616 - Save file service.xml; Remark:5615
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5617 |
5617 - To disable Wi-Fi, edit line to read as follows: <ForceWifiDisable&... |
Remark |
5626 - 5618 - Edit Wi-Fi status; Remark:5617 |
STEP: 5626 - 5618 - Edit Wi-Fi status; Remark:5617
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5618 |
5618 - Edit Wi-Fi status |
Instruction |
5626 - 5618 - Edit Wi-Fi status; Remark:5617 |
STEP: 5626 - 5618 - Edit Wi-Fi status; Remark:5617
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5619 |
5619 - Caution : Do not change any other settings in the service.xml file. |
Annotation |
5626 - 5618 - Edit Wi-Fi status; Remark:5617 |
STEP: 5626 - 5618 - Edit Wi-Fi status; Remark:5617
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5620 |
5620 - In the service.xml file, locate the line that reads ... |
Remark |
5625 - 5621 - Locate Wi-Fi parameter; Remark:5620 |
STEP: 5625 - 5621 - Locate Wi-Fi parameter; Remark:5620
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5621 |
5621 - Locate Wi-Fi parameter |
Instruction |
5625 - 5621 - Locate Wi-Fi parameter; Remark:5620 |
STEP: 5625 - 5621 - Locate Wi-Fi parameter; Remark:5620
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5622 |
5622 - Without closing the Detector Controller software, open service.xml |
Remark |
5624 - 5623 - Open service.xml file; Remark:5622 |
STEP: 5624 - 5623 - Open service.xml file; Remark:5622
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5623 |
5623 - Open service.xml file |
Instruction |
5624 - 5623 - Open service.xml file; Remark:5622 |
STEP: 5624 - 5623 - Open service.xml file; Remark:5622
RadSeeker CS/CL Wi-Fi Status Change
|
✔ |
| 5624 |
5624 - 5623 - Open service.xml file; Remark:5622 |
Procedure Step |
|
|
✔ |
