| 8627 |
8627 - 8621 - Remove sensor from back of door; Remark:8622 |
Procedure Step |
|
|
✔ |
| 8628 |
8628 - Install New Sensor |
Instruction |
8641 - 8628 - Install New Sensor; Remark: |
STEP: 8641 - 8628 - Install New Sensor; Remark:
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8629 |
8629 - Verify replacement sensor matches function and color of sensor previously rem... |
Instruction |
8642 - 8629 - Verify replacement sensor matches function and color of sensor previously rem...; Remark:8630 |
STEP: 8642 - 8629 - Verify replacement sensor matches function and color of sensor previously rem...; Remark:8630
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8630 |
8630 - Infrared sensor identification |
Remark |
8642 - 8629 - Verify replacement sensor matches function and color of sensor previously rem...; Remark:8630 |
STEP: 8642 - 8629 - Verify replacement sensor matches function and color of sensor previously rem...; Remark:8630
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8631 |
8631 - Remove nut closest to sensor face |
Instruction |
8643 - 8631 - Remove nut closest to sensor face; Remark:8632 |
STEP: 8643 - 8631 - Remove nut closest to sensor face; Remark:8632
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8632 |
8632 - Infrared Nut |
Remark |
8643 - 8631 - Remove nut closest to sensor face; Remark:8632 |
STEP: 8643 - 8631 - Remove nut closest to sensor face; Remark:8632
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8633 |
8633 - Add retained O-ring |
Instruction |
8644 - 8633 - Add retained O-ring; Remark:8634 |
STEP: 8644 - 8633 - Add retained O-ring; Remark:8634
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8634 |
8634 - Infrared Sensor O-ring |
Remark |
8644 - 8633 - Add retained O-ring; Remark:8634 |
STEP: 8644 - 8633 - Add retained O-ring; Remark:8634
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8635 |
8635 - Mount new infrared sensor |
Instruction |
8645 - 8635 - Mount new infrared sensor; Remark:8636 |
STEP: 8645 - 8635 - Mount new infrared sensor; Remark:8636
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8636 |
8636 - Insert sensor through hole on the back side of door. |
Remark |
8645 - 8635 - Mount new infrared sensor; Remark:8636 |
STEP: 8645 - 8635 - Mount new infrared sensor; Remark:8636
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8637 |
8637 - Note : The nut on the outside should be flush with the sensor. |
Annotation |
8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639 |
STEP: 8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8638 |
8638 - Add outside nut to front and hand tighten |
Instruction |
8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639 |
STEP: 8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8639 |
8639 - Use the adjustable wrench to snug the nut up slightly, just enough for the ga... |
Remark |
8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639 |
STEP: 8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8640 |
8640 - Connect applicable cable previously removed in Step 2-2 |
Instruction |
|
|
✔ |
| 8641 |
8641 - 8628 - Install New Sensor; Remark: |
Procedure Step |
|
|
✔ |
| 8642 |
8642 - 8629 - Verify replacement sensor matches function and color of sensor previously rem...; Remark:8630 |
Procedure Step |
|
|
✔ |
| 8643 |
8643 - 8631 - Remove nut closest to sensor face; Remark:8632 |
Procedure Step |
|
|
✔ |
| 8644 |
8644 - 8633 - Add retained O-ring; Remark:8634 |
Procedure Step |
|
|
✔ |
| 8645 |
8645 - 8635 - Mount new infrared sensor; Remark:8636 |
Procedure Step |
|
|
✔ |
| 8646 |
8646 - 8638 - Add outside nut to front and hand tighten; Remark:8639 |
Procedure Step |
|
|
✔ |
| 8647 |
8647 - 8661 - Reconnect applicable cable previously removed in Step 4-4; Remark:8559 |
Procedure Step |
|
|
✔ |
| 8648 |
8648 - Verify SC-770 display shows OCCUPIED when infrared beams are... |
Instruction |
8654 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651
8656 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651 |
STEP: 8654 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8649 |
8649 - Test sensors independently |
Instruction |
8655 - 8649 - Test sensors independently; Remark:8650 |
STEP: 8655 - 8649 - Test sensors independently; Remark:8650
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8650 |
8650 - Disconnect one receiver cable, shut door, and clear sensors for five (5) seco... |
Remark |
8655 - 8649 - Test sensors independently; Remark:8650 |
STEP: 8655 - 8649 - Test sensors independently; Remark:8650
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8651 |
8651 - SC-770 Occupied |
Remark |
8654 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651
8656 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651 |
STEP: 8654 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8652 |
8652 - Repeat steps 4-4 through 4-6 for other receiver sensors. |
Instruction |
8653 - 8652 - Repeat steps 4-4 through 4-6 for other receiver sensors.; Remark: |
|
✔ |
| 8653 |
8653 - 8652 - Repeat steps 4-4 through 4-6 for other receiver sensors.; Remark: |
Procedure Step |
|
|
✔ |
| 8654 |
8654 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651 |
Procedure Step |
|
|
✔ |
| 8655 |
8655 - 8649 - Test sensors independently; Remark:8650 |
Procedure Step |
|
|
✔ |
| 8656 |
8656 - 8648 - Verify SC-770 display shows OCCUPIED when infrared beams are...; Remark:8651 |
Procedure Step |
|
|
✔ |
| 8658 |
8658 - Retain sensor O-ring |
Instruction |
8660 - 8658 - Retain sensor O-ring; Remark:8659 |
STEP: 8660 - 8658 - Retain sensor O-ring; Remark:8659
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8659 |
8659 - Retain Sensor O-ring |
Remark |
8660 - 8658 - Retain sensor O-ring; Remark:8659 |
STEP: 8660 - 8658 - Retain sensor O-ring; Remark:8659
RPM Banner IR Occupancy Sensor Replacement
|
✔ |
| 8660 |
8660 - 8658 - Retain sensor O-ring; Remark:8659 |
Procedure Step |
|
|
✔ |
| 8661 |
8661 - Reconnect applicable cable previously removed in Step 4-4 |
Instruction |
8647 - 8661 - Reconnect applicable cable previously removed in Step 4-4; Remark:8559 |
|
✔ |
| 8662 |
8662 - Top Cables |
Remark |
8445 - 8444 - Disconnect Ethernet and AMPHENOL cables on SC-770; Remark:8662 |
STEP: 8445 - 8444 - Disconnect Ethernet and AMPHENOL cables on SC-770; Remark:8662
RPM SC-770 Controller Module Replacement
|
✔ |
| 8663 |
8663 - Bottom Cables |
Remark |
8445 - 8444 - Disconnect Ethernet and AMPHENOL cables on SC-770; Remark:8662 |
STEP: 8445 - 8444 - Disconnect Ethernet and AMPHENOL cables on SC-770; Remark:8662
RPM SC-770 Controller Module Replacement
|
✔ |
| 8664 |
8664 - |
Remark |
|
|
✔ |
| 8665 |
8665 - The mounting screws are located in a deep pocket in each corner of the ... |
Remark |
8667 - 8666 - Remove four (4) mounting screws; Remark:8665 |
STEP: 8667 - 8666 - Remove four (4) mounting screws; Remark:8665
RPM SC-770 Controller Module Replacement
|
✔ |
| 8666 |
8666 - Remove four (4) mounting screws |
Instruction |
8667 - 8666 - Remove four (4) mounting screws; Remark:8665 |
STEP: 8667 - 8666 - Remove four (4) mounting screws; Remark:8665
RPM SC-770 Controller Module Replacement
|
✔ |
| 8667 |
8667 - 8666 - Remove four (4) mounting screws; Remark:8665 |
Procedure Step |
|
|
✔ |
| 8668 |
8668 - |
Remark |
8446 - 8443 - Remove SC-770; Remark:8668 |
STEP: 8446 - 8443 - Remove SC-770; Remark:8668
RPM SC-770 Controller Module Replacement
|
✔ |
| 8669 |
8669 - DET-RPM-RAP-RM03, RPM Operational Testing |
Remark |
8670 - 319 - Perform operational test; Remark:8669 |
STEP: 8670 - 319 - Perform operational test; Remark:8669
RPM ELK Siren Replacement
|
✔ |
| 8670 |
8670 - 319 - Perform operational test; Remark:8669 |
Procedure Step |
|
|
✔ |
| 8672 |
8672 - Disconnect Strobe Light Wiring |
Instruction |
8719 - 8672 - Disconnect Strobe Light Wiring; Remark: |
STEP: 8719 - 8672 - Disconnect Strobe Light Wiring; Remark:
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8673 |
8673 - Locate terminal block TB4 |
Instruction |
8720 - 8673 - Locate terminal block TB4; Remark:8674
8792 - 8673 - Locate terminal block TB4; Remark:8674
8803 - 8673 - Locate terminal block TB4; Remark:8674 |
STEP: 8720 - 8673 - Locate terminal block TB4; Remark:8674
RPM Alarm Strobe Light Assembly Replacement
STEP: 8792 - 8673 - Locate terminal block TB4; Remark:8674
RPM ELK Siren Replacement
STEP: 8803 - 8673 - Locate terminal block TB4; Remark:8674
RPM ELK Siren Replacement
|
✔ |
| 8674 |
8674 - For vehicle monitors: Open the upper RPM door |
Remark |
8720 - 8673 - Locate terminal block TB4; Remark:8674
8792 - 8673 - Locate terminal block TB4; Remark:8674
8803 - 8673 - Locate terminal block TB4; Remark:8674
8820 - 8819 - Locate terminal block TB2; Remark:8674
9387 - 9369 - Open Control pillar door to access terminal block (TB4) on back of door; Remark:8674
9406 - 9351 - Open Control door to access terminal block (TB4) on the back of the door ...; Remark:8674 |
STEP: 8720 - 8673 - Locate terminal block TB4; Remark:8674
RPM Alarm Strobe Light Assembly Replacement
STEP: 8792 - 8673 - Locate terminal block TB4; Remark:8674
RPM ELK Siren Replacement
STEP: 8803 - 8673 - Locate terminal block TB4; Remark:8674
RPM ELK Siren Replacement
STEP: 8820 - 8819 - Locate terminal block TB2; Remark:8674
RPM ELK Siren Driver Replacement
STEP: 9387 - 9369 - Open Control pillar door to access terminal block (TB4) on back of door; Remark:8674
RPM LED Fault Light Assembly Replacement
STEP: 9406 - 9351 - Open Control door to access terminal block (TB4) on the back of the door ...; Remark:8674
RPM LED Fault Light Assembly Replacement
|
✔ |
| 8675 |
8675 - Note : If repairing a pedestrian monitor, go to Step 2-4 |
Annotation |
8720 - 8673 - Locate terminal block TB4; Remark:8674
9406 - 9351 - Open Control door to access terminal block (TB4) on the back of the door ...; Remark:8674 |
STEP: 8720 - 8673 - Locate terminal block TB4; Remark:8674
RPM Alarm Strobe Light Assembly Replacement
STEP: 9406 - 9351 - Open Control door to access terminal block (TB4) on the back of the door ...; Remark:8674
RPM LED Fault Light Assembly Replacement
|
✔ |
| 8676 |
8676 - Disconnect wiring from terminal block TB4 |
Instruction |
8721 - 8676 - Disconnect wiring from terminal block TB4; Remark:8677 |
STEP: 8721 - 8676 - Disconnect wiring from terminal block TB4; Remark:8677
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8677 |
8677 - Using a small flathead screwdriver, for the blue neutron strobe, remove wires... |
Remark |
8721 - 8676 - Disconnect wiring from terminal block TB4; Remark:8677
8740 - 8713 - Reconnect wiring from terminal TB4; Remark:8677 |
STEP: 8721 - 8676 - Disconnect wiring from terminal block TB4; Remark:8677
RPM Alarm Strobe Light Assembly Replacement
STEP: 8740 - 8713 - Reconnect wiring from terminal TB4; Remark:8677
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8678 |
8678 - Release wiring harness from fasteners |
Instruction |
8722 - 8678 - Release wiring harness from fasteners; Remark:8679
8724 - 8678 - Release wiring harness from fasteners; Remark:8682
8753 - 8678 - Release wiring harness from fasteners; Remark:8752
8826 - 8678 - Release wiring harness from fasteners; Remark:8825 |
STEP: 8722 - 8678 - Release wiring harness from fasteners; Remark:8679
RPM Alarm Strobe Light Assembly Replacement
STEP: 8724 - 8678 - Release wiring harness from fasteners; Remark:8682
RPM Alarm Strobe Light Assembly Replacement
STEP: 8753 - 8678 - Release wiring harness from fasteners; Remark:8752
RPM ELK Siren Replacement
STEP: 8826 - 8678 - Release wiring harness from fasteners; Remark:8825
RPM ELK Siren Driver Replacement
|
✔ |
| 8679 |
8679 - TB4 Wiring Harness Fasteners |
Remark |
8722 - 8678 - Release wiring harness from fasteners; Remark:8679 |
STEP: 8722 - 8678 - Release wiring harness from fasteners; Remark:8679
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8680 |
8680 - Identify strobe light wiring (for pedestrian monitor) |
Instruction |
8723 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681
8742 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681 |
STEP: 8723 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681
RPM Alarm Strobe Light Assembly Replacement
STEP: 8742 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8681 |
8681 - Blue neutron strobe: Positive terminal (+): Two (2... |
Remark |
8723 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681
8742 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681 |
STEP: 8723 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681
RPM Alarm Strobe Light Assembly Replacement
STEP: 8742 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8682 |
8682 - Use cutter pliers to remove any fasteners associated wth strobe light wiring.... |
Remark |
8724 - 8678 - Release wiring harness from fasteners; Remark:8682 |
STEP: 8724 - 8678 - Release wiring harness from fasteners; Remark:8682
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8683 |
8683 - Disconnect wires from strobe light wiring |
Instruction |
8725 - 8683 - Disconnect wires from strobe light wiring; Remark:8684 |
STEP: 8725 - 8683 - Disconnect wires from strobe light wiring; Remark:8684
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8684 |
8684 - Remove forked connectors from Sonalert using a small Phillips screwdriver. Us... |
Remark |
8725 - 8683 - Disconnect wires from strobe light wiring; Remark:8684 |
STEP: 8725 - 8683 - Disconnect wires from strobe light wiring; Remark:8684
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8685 |
8685 - Uninstall Red and Blue Strobe Assemblies |
Instruction |
8726 - 8685 - Uninstall Red and Blue Strobe Assemblies; Remark: |
STEP: 8726 - 8685 - Uninstall Red and Blue Strobe Assemblies; Remark:
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8686 |
8686 - Remove circular black cover from strobe light |
Instruction |
8727 - 8686 - Remove circular black cover from strobe light; Remark:8687 |
STEP: 8727 - 8686 - Remove circular black cover from strobe light; Remark:8687
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8687 |
8687 - Use a small flathead screwdriver to pry the circular black cover off. |
Remark |
8727 - 8686 - Remove circular black cover from strobe light; Remark:8687 |
STEP: 8727 - 8686 - Remove circular black cover from strobe light; Remark:8687
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8688 |
8688 - Remove strobe light assembly |
Instruction |
8728 - 8688 - Remove strobe light assembly; Remark:8689 |
STEP: 8728 - 8688 - Remove strobe light assembly; Remark:8689
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8689 |
8689 - Use a 3/16" Allen wrench to remove strobe light assembly. |
Remark |
8728 - 8688 - Remove strobe light assembly; Remark:8689 |
STEP: 8728 - 8688 - Remove strobe light assembly; Remark:8689
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8690 |
8690 - Pry strobe assembly from RPM door |
Instruction |
8729 - 8690 - Pry strobe assembly from RPM door; Remark:8691 |
STEP: 8729 - 8690 - Pry strobe assembly from RPM door; Remark:8691
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8691 |
8691 - Use a putty knife to pry strobe assembly off RPM door. |
Remark |
8729 - 8690 - Pry strobe assembly from RPM door; Remark:8691 |
STEP: 8729 - 8690 - Pry strobe assembly from RPM door; Remark:8691
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8692 |
8692 - Pull hardware assembly with wires to remove |
Instruction |
8730 - 8692 - Pull hardware assembly with wires to remove; Remark: |
STEP: 8730 - 8692 - Pull hardware assembly with wires to remove; Remark:
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8693 |
8693 - Remove residue off RPM door |
Instruction |
8731 - 8693 - Remove residue off RPM door; Remark:8694
8771 - 8693 - Remove residue off RPM door; Remark: |
STEP: 8731 - 8693 - Remove residue off RPM door; Remark:8694
RPM Alarm Strobe Light Assembly Replacement
STEP: 8771 - 8693 - Remove residue off RPM door; Remark:
RPM ELK Siren Replacement
|
✔ |
| 8694 |
8694 - Use a putty knife to remove silicone or residue off RPM door. |
Remark |
8731 - 8693 - Remove residue off RPM door; Remark:8694 |
STEP: 8731 - 8693 - Remove residue off RPM door; Remark:8694
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8695 |
8695 - Install and Seal New Red and Blue Strobe Assembly |
Instruction |
8732 - 8695 - Install and Seal New Red and Blue Strobe Assembly; Remark: |
STEP: 8732 - 8695 - Install and Seal New Red and Blue Strobe Assembly; Remark:
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8696 |
8696 - Route strobe light assembly wires |
Instruction |
8733 - 8696 - Route strobe light assembly wires; Remark:8697 |
STEP: 8733 - 8696 - Route strobe light assembly wires; Remark:8697
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8697 |
8697 - Insert new strobe light assembly wires through grommet located in RPM door. |
Remark |
8733 - 8696 - Route strobe light assembly wires; Remark:8697 |
STEP: 8733 - 8696 - Route strobe light assembly wires; Remark:8697
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8698 |
8698 - Apply silicone to strobe assembly |
Instruction |
|
|
✔ |
| 8699 |
8699 - Apply silicone to strobe light assembly |
Instruction |
8734 - 8699 - Apply silicone to strobe light assembly; Remark:8700 |
STEP: 8734 - 8699 - Apply silicone to strobe light assembly; Remark:8700
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8700 |
8700 - Apply Silicone to Strobe Light |
Remark |
8734 - 8699 - Apply silicone to strobe light assembly; Remark:8700 |
STEP: 8734 - 8699 - Apply silicone to strobe light assembly; Remark:8700
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8701 |
8701 - Warning : Use protective gloves when handling silicone. |
Annotation |
8734 - 8699 - Apply silicone to strobe light assembly; Remark:8700
8737 - 8709 - Remove excess silicone from around strobe light assembly edges; Remark:8710
8777 - 8775 - Apply a light amount of silicone around nuts on back side of door; Remark:
8785 - 8784 - Apply a light amount of silicone around wires and grommet on back side of doo...; Remark:
9397 - 9366 - Apply silicone around the rim of socket on back of door; Remark:9536 |
STEP: 8734 - 8699 - Apply silicone to strobe light assembly; Remark:8700
RPM Alarm Strobe Light Assembly Replacement
STEP: 8737 - 8709 - Remove excess silicone from around strobe light assembly edges; Remark:8710
RPM Alarm Strobe Light Assembly Replacement
STEP: 8777 - 8775 - Apply a light amount of silicone around nuts on back side of door; Remark:
RPM ELK Siren Replacement
STEP: 8785 - 8784 - Apply a light amount of silicone around wires and grommet on back side of doo...; Remark:
RPM ELK Siren Replacement
STEP: 9397 - 9366 - Apply silicone around the rim of socket on back of door; Remark:9536
RPM LED Fault Light Assembly Replacement
|
✔ |
| 8702 |
8702 - Install new strobe light assembly to front of door |
Instruction |
8735 - 8702 - Install new strobe light assembly to front of door; Remark:8703 |
STEP: 8735 - 8702 - Install new strobe light assembly to front of door; Remark:8703
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8703 |
8703 - Align strobe assembly hole to the hole in the front of the RPM door. Then, fi... |
Remark |
8735 - 8702 - Install new strobe light assembly to front of door; Remark:8703 |
STEP: 8735 - 8702 - Install new strobe light assembly to front of door; Remark:8703
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8704 |
8704 - Tighten strobe light assembly |
Instruction |
8736 - 8704 - Tighten strobe light assembly; Remark:8705 |
STEP: 8736 - 8704 - Tighten strobe light assembly; Remark:8705
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8705 |
8705 - Use a 3/16" Allen wrench to tighten clockwise until secure. |
Remark |
8736 - 8704 - Tighten strobe light assembly; Remark:8705 |
STEP: 8736 - 8704 - Tighten strobe light assembly; Remark:8705
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8706 |
8706 - Caution : Do not overtighten hardware |
Annotation |
8736 - 8704 - Tighten strobe light assembly; Remark:8705 |
STEP: 8736 - 8704 - Tighten strobe light assembly; Remark:8705
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8707 |
8707 - Insert circular black cover on strobe light assembly |
Instruction |
8738 - 8707 - Insert circular black cover on strobe light assembly; Remark:8708 |
STEP: 8738 - 8707 - Insert circular black cover on strobe light assembly; Remark:8708
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8708 |
8708 - Strobe Light Circular Black Cover |
Remark |
8738 - 8707 - Insert circular black cover on strobe light assembly; Remark:8708 |
STEP: 8738 - 8707 - Insert circular black cover on strobe light assembly; Remark:8708
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8709 |
8709 - Remove excess silicone from around strobe light assembly edges |
Instruction |
8737 - 8709 - Remove excess silicone from around strobe light assembly edges; Remark:8710 |
STEP: 8737 - 8709 - Remove excess silicone from around strobe light assembly edges; Remark:8710
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8710 |
8710 - Strobe Light Edges |
Remark |
8737 - 8709 - Remove excess silicone from around strobe light assembly edges; Remark:8710 |
STEP: 8737 - 8709 - Remove excess silicone from around strobe light assembly edges; Remark:8710
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8711 |
8711 - Reconnect Strobe Light Wiring |
Instruction |
8739 - 8711 - Reconnect Strobe Light Wiring; Remark: |
STEP: 8739 - 8711 - Reconnect Strobe Light Wiring; Remark:
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8712 |
8712 - Note : If repairing a pedestrian monitor, go to Step 5-4 |
Annotation |
8740 - 8713 - Reconnect wiring from terminal TB4; Remark:8677
9387 - 9369 - Open Control pillar door to access terminal block (TB4) on back of door; Remark:8674 |
STEP: 8740 - 8713 - Reconnect wiring from terminal TB4; Remark:8677
RPM Alarm Strobe Light Assembly Replacement
STEP: 9387 - 9369 - Open Control pillar door to access terminal block (TB4) on back of door; Remark:8674
RPM LED Fault Light Assembly Replacement
|
✔ |
| 8713 |
8713 - Reconnect wiring from terminal TB4 |
Instruction |
8740 - 8713 - Reconnect wiring from terminal TB4; Remark:8677 |
STEP: 8740 - 8713 - Reconnect wiring from terminal TB4; Remark:8677
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8714 |
8714 - Add wire fasteners where removed |
Instruction |
8741 - 8714 - Add wire fasteners where removed; Remark:
8799 - 8714 - Add wire fasteners where removed; Remark:8798
8845 - 8714 - Add wire fasteners where removed; Remark: |
STEP: 8741 - 8714 - Add wire fasteners where removed; Remark:
RPM Alarm Strobe Light Assembly Replacement
STEP: 8799 - 8714 - Add wire fasteners where removed; Remark:8798
RPM ELK Siren Replacement
STEP: 8845 - 8714 - Add wire fasteners where removed; Remark:
RPM ELK Siren Driver Replacement
|
✔ |
| 8715 |
8715 - Crimp forked connectors to end of strobe light wires |
Instruction |
8743 - 8715 - Crimp forked connectors to end of strobe light wires; Remark:8716 |
STEP: 8743 - 8715 - Crimp forked connectors to end of strobe light wires; Remark:8716
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8716 |
8716 - Remove ¼ inch (6mm) of insulation from the strobe light assembly wire end us... |
Remark |
8743 - 8715 - Crimp forked connectors to end of strobe light wires; Remark:8716 |
STEP: 8743 - 8715 - Crimp forked connectors to end of strobe light wires; Remark:8716
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8717 |
8717 - Connect strobe light assembly wire to Sonalert |
Instruction |
8744 - 8717 - Connect strobe light assembly wire to Sonalert; Remark:8718 |
STEP: 8744 - 8717 - Connect strobe light assembly wire to Sonalert; Remark:8718
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8718 |
8718 - Using a small Phillips screwdriver, terminate the forked connectors to the co... |
Remark |
8744 - 8717 - Connect strobe light assembly wire to Sonalert; Remark:8718 |
STEP: 8744 - 8717 - Connect strobe light assembly wire to Sonalert; Remark:8718
RPM Alarm Strobe Light Assembly Replacement
|
✔ |
| 8719 |
8719 - 8672 - Disconnect Strobe Light Wiring; Remark: |
Procedure Step |
|
|
✔ |
| 8720 |
8720 - 8673 - Locate terminal block TB4; Remark:8674 |
Procedure Step |
|
|
✔ |
| 8721 |
8721 - 8676 - Disconnect wiring from terminal block TB4; Remark:8677 |
Procedure Step |
|
|
✔ |
| 8722 |
8722 - 8678 - Release wiring harness from fasteners; Remark:8679 |
Procedure Step |
|
|
✔ |
| 8723 |
8723 - 8680 - Identify strobe light wiring (for pedestrian monitor); Remark:8681 |
Procedure Step |
|
|
✔ |
| 8724 |
8724 - 8678 - Release wiring harness from fasteners; Remark:8682 |
Procedure Step |
|
|
✔ |
| 8725 |
8725 - 8683 - Disconnect wires from strobe light wiring; Remark:8684 |
Procedure Step |
|
|
✔ |
| 8726 |
8726 - 8685 - Uninstall Red and Blue Strobe Assemblies; Remark: |
Procedure Step |
|
|
✔ |
| 8727 |
8727 - 8686 - Remove circular black cover from strobe light; Remark:8687 |
Procedure Step |
|
|
✔ |
| 8728 |
8728 - 8688 - Remove strobe light assembly; Remark:8689 |
Procedure Step |
|
|
✔ |
