radEAGLET Background Measurement | FRONTLINE Maintenance Tool

Last Updated: 04/25/2025 1:44 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
ORTEC radEAGLET-R 2SG	Device	Published	10/08/2024 1:48 PM
10797 - 3825 - Verify instrument is ready; Remark:	Procedure Step	Published	07/21/2024 3:10 PM
3825 - Verify instrument is ready	Instruction	Published	03/28/2022 6:15 PM
10675 - 10672 - Verify instrument is in dose rate mode; Remark:10795	Procedure Step	Published	07/19/2024 4:26 PM
10672 - Verify instrument is in dose rate mode	Instruction	Published	07/19/2024 4:25 PM
10795 - For information on how to power on the instrument, refer to DET-HHD-ORT-RET-O...	Remark	Published	04/13/2025 5:26 PM
10830 - radEAGLET Verify instrument is in dose rate mode	Remark	Published	09/25/2024 8:54 PM
10831 - 10709 - Verify instrument is stabilized; Remark:10707	Procedure Step	Published	07/21/2024 3:35 PM
10709 - Verify instrument is stabilized	Instruction	Published	07/19/2024 3:02 PM
10707 - The instrument is stabilized when the icon is green.	Remark	Published	07/19/2024 3:03 PM
10833 - radEAGLET Verify instrument stabilized	Remark	Published	09/25/2024 8:55 PM
10828 - 3494 - Collect background measurement; Remark:	Procedure Step	Published	07/21/2024 3:38 PM
3494 - Collect background measurement	Instruction	Published	08/27/2024 5:25 PM
10832 - 2209 - Verify instrument is in a suitable background radiation area; Remark:10693	Procedure Step	Published	07/21/2024 3:36 PM
2209 - Verify instrument is in a suitable background radiation area	Instruction	Published	06/11/2024 3:31 PM
10693 - The instrument should be located near the secondary inspection area, in simil...	Remark	Published	07/19/2024 3:12 PM
10829 - No Radiation Sources	Remark	Published	09/29/2024 7:17 PM
10822 - 3525 - Navigate to Menu; Remark:10741	Procedure Step	Published	07/21/2024 3:44 PM
10695 - Note : Left, right, and down arrow Buttons will select screen options. The remainder...	Annotation	Published	07/19/2024 3:14 PM
3525 - Navigate to Menu	Instruction	Published	07/29/2021 6:41 AM
10741 - Select MENU	Remark	Published	07/20/2024 8:44 PM
10821 - radEAGLET Select MENU unsing arrow	Remark	Published	09/29/2024 7:24 PM
10823 - 10819 - Navigate to background spectrum; Remark:10816	Procedure Step	Published	07/21/2024 3:49 PM
10820 - Note : Down arrow button will cycle through menu items.	Annotation	Published	07/21/2024 3:50 PM
10819 - Navigate to background spectrum	Instruction	Published	07/21/2024 3:45 PM
10816 - Press down arrow and highlight Background Spec.	Remark	Published	07/21/2024 3:46 PM
10817 - radEAGLET Background spec DOWN using arrow	Remark	Published	09/29/2024 7:28 PM
10669 - Choose SELECT	Remark	Published	07/19/2024 4:31 PM
10818 - radEAGLET SELECT Using arrow	Remark	Published	09/29/2024 7:31 PM
10824 - 10815 - Begin background collection; Remark:10813	Procedure Step	Published	07/21/2024 3:55 PM
10815 - Begin background collection	Instruction	Published	07/21/2024 3:51 PM
10813 - Select START	Remark	Published	07/21/2024 3:53 PM
10814 - radEAGLET Clean background spectrum START	Remark	Published	09/29/2024 7:38 PM
10825 - 2220 - Wait for measurement to complete; Remark:10812	Procedure Step	Published	07/21/2024 3:56 PM
2220 - Wait for measurement to complete	Instruction	Published	10/22/2020 11:15 AM
10812 - radEAGLET Wait for measurement	Remark	Published	09/29/2024 7:39 PM
10826 - 10811 - Save new background measurement; Remark:10806	Procedure Step	Published	07/21/2024 4:03 PM
10811 - Save new background measurement	Instruction	Published	07/21/2024 3:57 PM
10806 - Select NEXT	Remark	Published	07/21/2024 3:58 PM
10807 - radEAGLET Save background measure NEXT	Remark	Published	09/29/2024 7:55 PM
10808 - Select SAVE	Remark	Published	07/21/2024 4:00 PM
10809 - radEAGLET Save background measure SAVE	Remark	Published	09/29/2024 8:00 PM
10746 - Select OK	Remark	Published	07/20/2024 8:50 PM
10810 - radEAGLET Save background measure OK	Remark	Published	09/29/2024 8:00 PM
10827 - 10805 - Exit background measurement; Remark:10800	Procedure Step	Published	07/21/2024 4:10 PM
10805 - Exit background measurement	Instruction	Published	07/21/2024 4:04 PM
10800 - Select NEXT	Remark	Published	07/21/2024 4:04 PM
10801 - radEAGLET Exit background measure NEXT	Remark	Published	09/29/2024 9:05 PM
10678 - Select EXIT	Remark	Published	07/19/2024 4:18 PM
10802 - radEAGLET Exit background measure EXIT	Remark	Published	09/29/2024 9:05 PM
10803 - Select EXIT again	Remark	Published	07/21/2024 4:09 PM
10804 - radEAGLET Exit background measure EXIT again	Remark	Published	10/04/2024 10:03 PM
253 - 242 - Document and report any unresolved problems; Remark:	Procedure Step	Published	06/22/2021 10:23 AM
242 - Document and report any unresolved problems	Instruction	Published	04/21/2025 11:45 AM
Operator Procedure	Document Type	Published	03/02/2020 3:31 PM
Note	Annotation Type	Published	03/02/2020 3:25 PM
radEAGLET start up sequence	Image	Published	07/21/2024 3:26 PM
radEAGLET Verify instrument stabilized	Image	Published	07/19/2024 4:32 PM
No Radiation Sources	Image	Published	07/21/2024 2:10 PM
radEAGLET Select MENU using arrow	Image	Published	07/21/2024 4:11 PM
radEAGLET Background spec DOWN using arrow	Image	Published	07/21/2024 4:11 PM
radEAGLET SELECT Using arrow	Image	Published	07/21/2024 4:11 PM
radEAGLET Clean background spectrum START	Image	Published	07/21/2024 4:11 PM
radEAGLET Wait for measurement	Image	Published	07/21/2024 4:11 PM
radEAGLET Save background measure NEXT	Image	Published	07/21/2024 4:11 PM
radEAGLET SAVE	Image	Published	07/25/2024 8:46 PM
radEAGLET Save background measure OK	Image	Published	07/21/2024 4:11 PM
radEAGLET NEXT	Image	Published	07/25/2024 8:45 PM
radEAGLET EXIT	Image	Published	07/25/2024 8:45 PM
radEAGLET Exit background measure EXIT again	Image	Published	07/21/2024 4:11 PM

DET-HHD-ORT-RET-OP02

This procedure describes how to collect a new background radiation measurement with the radEAGLET. This should be performed prior to performing a radioisotope identification measurement to achieve the best possible identification results.

Equipment Hierarchy

ORTEC radEAGLET-R 2SG

Technician Level

Duration

Materials Required

None

Originators

Brian Tucker

Originating Organization

Pacific Northwest National Laboratory

Approver

James Kitchen

Date of Origin

2024-06-01

Version

0.00

Step 1

Main Step

10797 - 3825 - Verify instrument is ready; Remark:

Step 00

3825 - Verify instrument is ready

Verify instrument is ready

10675 - 10672 - Verify instrument is in dose rate mode; Remark:10795

Step 00

10672 - Verify instrument is in dose rate mode

Verify instrument is in dose rate mode

10795 - For information on how to power on the instrument, refer to DET-HHD-ORT-RET-O...

For information on how to power on the instrument, refer to DET-HHD-ORT-RET-OP01, radEAGLET Operation

10830 - radEAGLET Verify instrument is in dose rate mode

10831 - 10709 - Verify instrument is stabilized; Remark:10707

Step 00

10709 - Verify instrument is stabilized

Verify instrument is stabilized

10707 - The instrument is stabilized when the icon is green.

The instrument is stabilized when the icon is green.

10833 - radEAGLET Verify instrument stabilized

Step 2

Main Step

10828 - 3494 - Collect background measurement; Remark:

Step 00

3494 - Collect background measurement

Collect background measurement

10832 - 2209 - Verify instrument is in a suitable background radiation area; Remark:10693

Step 00

2209 - Verify instrument is in a suitable background radiation area

Verify instrument is in a suitable background radiation area

10693 - The instrument should be located near the secondary inspection area, in simil...

The instrument should be located near the secondary inspection area, in similar surroundings, but not directly adjacent to the conveyance, object, or person.