8312 - Note : Take care when removing springs, as they might snap back and become misplaced... 阅读更多 关于 8312 - Note : Take care when removing springs, as they might snap back and become misplaced...
8254 - Note : If firmware version is not correct, perform procedure DET-RPM-RAP-CM02 to upd... 阅读更多 关于 8254 - Note : If firmware version is not correct, perform procedure DET-RPM-RAP-CM02 to upd...
8232 - Note : There might not be any LED activity on the LD-260 when the RPM is turned off ... 阅读更多 关于 8232 - Note : There might not be any LED activity on the LD-260 when the RPM is turned off ...
8192 - Note : If Rabbit board is not pre-configured with correct firmware version, this mus... 阅读更多 关于 8192 - Note : If Rabbit board is not pre-configured with correct firmware version, this mus...
8034 - Note : A gamma hi fault may also occur during this step. If this is unacceptable, ei... 阅读更多 关于 8034 - Note : A gamma hi fault may also occur during this step. If this is unacceptable, ei...
8021 - Note : Because CF-252 sources also emit gamma radiation, a gamma alarm may also occu... 阅读更多 关于 8021 - Note : Because CF-252 sources also emit gamma radiation, a gamma alarm may also occu...
8013 - Note : Occupancy sensors must be disabled during testing of fault indications. 阅读更多 关于 8013 - Note : Occupancy sensors must be disabled during testing of fault indications.
7999 - Note : Move the source at least 10m from the detectors. 阅读更多 关于 7999 - Note : Move the source at least 10m from the detectors.
8005 - Note : Move the source at least 10m from the detectors. 阅读更多 关于 8005 - Note : Move the source at least 10m from the detectors.
7982 - Note : Document each step and verification on attached checklist 阅读更多 关于 7982 - Note : Document each step and verification on attached checklist
