Process

11546 - 11540 - Set network address - Process, Notes: 11541

eArango — Mon, 09 Jun 2025 18:49:09 +0000

11546 - 11540 - Set network address - Process, Notes: 11541 eArango Mon, 06/09/2025 - 11:49

11542 - Note : Default IP for SC-770 is 192.168.2.2, contact CAS Sys...

Type

Note

Default IP for SC-770 is 192.168.2.2, contact CAS System Administrator if changed.

11540 - Set network address

Set network address

Go to

10006 - 10004 - SC-770 communicating with CAS? - Decision, Notes: 10005

Note

11541 - Press #

11545 - 11543 - Enable PROFILING - Process, Notes: 11544

eArango — Mon, 09 Jun 2025 18:45:15 +0000

11545 - 11543 - Enable PROFILING - Process, Notes: 11544 eArango Mon, 06/09/2025 - 11:45

11543 - Enable PROFILING

Enable PROFILING

Go to

11546 - 11540 - Set network address - Process, Notes: 11541

Note

11544 - Press #

11506 - 11503 - Was a Change Made? - Process, Notes: 11515

eArango — Thu, 05 Jun 2025 19:07:13 +0000

11506 - 11503 - Was a Change Made? - Process, Notes: 11515 eArango Thu, 06/05/2025 - 12:07

11503 - Was a Change Made?

Was a Change Made?

Yes

Go to

8987 - 8981 - 120/240 VAC present at power supply? - Decision, Notes: 8982

Go to

8992 - 8988 - Contact Facilities - Incomplete, Notes: 8989

Step Reference Number

Note

11515 - This includes anything that was replaced, secured, reinsert...

11505 - 9019 - Inspect Wiring - Process, Notes: 8982

eArango — Thu, 05 Jun 2025 19:01:18 +0000

11505 - 9019 - Inspect Wiring - Process, Notes: 8982 eArango Thu, 06/05/2025 - 12:01

11480 - Warning : The technician must be trained and certified to work with A...

Type

Warning

The technician must be trained and certified to work with AC power, as hazardous currents may be present.

9019 - Inspect Wiring

Inspect Wiring

Go to

11504 - 11503 - Was a Change Made? - Decision, Notes:

Step Reference Number

Note

8982 - Using a digital multimeter in AC mode

11498 - Verify 120/240 VAC is present at the AC breaker output. 

11494 - Inspect wiring and connections between the AC breaker and the 15 VDC power su...

11495 - Check both input and output sides of the AC line filter, if installed. 

11501 - 11500 - Measure 15 VDC Power Supply Input - Process, Notes: 8982

eArango — Thu, 05 Jun 2025 18:05:12 +0000

11501 - 11500 - Measure 15 VDC Power Supply Input - Process, Notes: 8982 eArango Thu, 06/05/2025 - 11:05

11500 - Measure 15 VDC Power Supply Input

Measure 15 VDC Power Supply Input

Note

8982 - Using a digital multimeter in AC mode

8983 - Measure the AC voltage at the input to the 15 VDC power supply

11493 - 9019 - Inspect Wiring - Process, Notes: 8982

eArango — Thu, 05 Jun 2025 17:07:16 +0000

11493 - 9019 - Inspect Wiring - Process, Notes: 8982 eArango Thu, 06/05/2025 - 10:07

11480 - Warning : The technician must be trained and certified to work with A...

Type

Warning

The technician must be trained and certified to work with AC power, as hazardous currents may be present.

9019 - Inspect Wiring

Inspect Wiring

Go to

11497 - 11496 - Voltage Present at Circuit Breaker Output? - Decision, Notes:

Step Reference Number

Note

8982 - Using a digital multimeter in AC mode

8870 - Verify 120/240 VAC is present at AC breaker output

11494 - Inspect wiring and connections between the AC breaker and the 15 VDC power su...

11495 - Check both input and output sides of the AC line filter, if installed. 

11479 - 11478 - Adjust Output Voltage to 15VDC - Process, Notes: 11488

eArango — Thu, 05 Jun 2025 10:45:44 +0000

11479 - 11478 - Adjust Output Voltage to 15VDC - Process, Notes: 11488 eArango Thu, 06/05/2025 - 03:45

8993 - Warning : The 120/240 VAC terminal is adjacent to the DC output terminals.

Type

Warning

The 120/240 VAC terminal is adjacent to the DC output terminals.

11478 - Adjust Output Voltage to 15VDC

Adjust Output Voltage to 15VDC

Go to

8999 - 8997 - AC LED on LD-260 illuminated? - Decision, Notes: 8998

Step Reference Number

Note

11488 - Measure the output voltage on the power supply using a digital multimeter.&nb...

11489 - Adjust the output as needed using the potentiometer near the AC/DC terminals....

11477 - 11476 - Turn RPM Circuit Breaker ON - Process, Notes: 11485

eArango — Thu, 05 Jun 2025 10:31:39 +0000

11477 - 11476 - Turn RPM Circuit Breaker ON - Process, Notes: 11485 eArango Thu, 06/05/2025 - 03:31

11475 - Note : If the circuit breaker actuates again, a ground fault likely exists and must ...

Type

Note

If the circuit breaker actuates again, a ground fault likely exists and must be corrected.

11476 - Turn RPM Circuit Breaker ON

Turn RPM Circuit Breaker ON

Go to

8999 - 8997 - AC LED on LD-260 illuminated? - Decision, Notes: 8998

Step Reference Number

Note

11485 - The AC circuit breaker might be tripped. 

11486 - Reset the breaker at the bottom of the RPM control pillar.

11323 - 5862 - Charge backup battery - Process, Notes:

thal705 — Fri, 07 Feb 2025 23:48:59 +0000

11323 - 5862 - Charge backup battery - Process, Notes: thal705 Fri, 02/07/2025 - 15:48

5862 - Charge backup battery

Charge backup battery

Go to

5954 - 5953 - Power off instrument - Process, Notes: 5939

Step Reference Number

10611 - 9113 - Establish Initial conditions - Process, Notes: 9115

aOkowita — Wed, 21 Feb 2024 20:22:32 +0000

10611 - 9113 - Establish Initial conditions - Process, Notes: 9115 aOkowita Wed, 02/21/2024 - 12:22

9113 - Establish Initial conditions

Establish Initial conditions

Go to

10610 - 10584 - PWR LED on Nanocontroller Illuminated? - Decision, Notes: 10097

Note

9115 - Verify RPM is ON

10587 - Initiate an OCCUPIED condition by: Vehicle M...

7311 - Use a magnet to disable tamper switches for all open doors. Use adhesive tape...

10588 - Verify the SC-770 controller displays OCCUPIED.