DET-RPM-RAP-FC02
11474 - 8997 - Start - Begin, Notes:
8997 - Start
Start
Step Reference Number
01
9004 - 9000 - AC LED on LD-260 illuminated? - Decision, Notes: 8998
11477 - 11476 - Turn RPM Circuit Breaker ON - Process, Notes: 11485
11475 - Note : If the circuit breaker actuates again, a ground fault likely exists and must ...
Type
Note
If the circuit breaker actuates again, a ground fault likely exists and must be corrected.
11476 - Turn RPM Circuit Breaker ON
Turn RPM Circuit Breaker ON
Step Reference Number
03
11479 - 11478 - Adjust Output Voltage to 15VDC - Process, Notes: 11488
8993 - Warning : The 120/240 VAC terminal is adjacent to the DC output terminals.
Type
Warning
The 120/240 VAC terminal is adjacent to the DC output terminals.
11478 - Adjust Output Voltage to 15VDC
Adjust Output Voltage to 15VDC
11481 - 9000 - AC LED on LD-260 illuminated? - Decision, Notes:
11483 - 11482 - Is AC power present? - Decision, Notes: 8982
11480 - Warning : The technician must be trained and certified to work with A...
Type
Warning
The technician must be trained and certified to work with AC power, as hazardous currents may be present.
11482 - Is AC power present?
Is AC power present?
11502 - 11500 - Measure 15 VDC Power Supply Input - Decision, Notes: 8982
11480 - Warning : The technician must be trained and certified to work with A...
Type
Warning
The technician must be trained and certified to work with AC power, as hazardous currents may be present.
11500 - Measure 15 VDC Power Supply Input
Measure 15 VDC Power Supply Input
Step Reference Number
07
11505 - 9019 - Inspect Wiring - Process, Notes: 8982
11480 - Warning : The technician must be trained and certified to work with A...
Type
Warning
The technician must be trained and certified to work with AC power, as hazardous currents may be present.
9019 - Inspect Wiring
Inspect Wiring
Step Reference Number
08
11506 - 11503 - Was a Change Made? - Process, Notes: 11515
11511 - 11508 - Did Voltage Adjust? - Decision, Notes:
Flowchart Title
Cấp điện 120/240 VAC