11133 - Caution : Do not overtighten screw. This will make it difficult to turn power knob.
Type
Caution
Do not overtighten screw. This will make it difficult to turn power knob.
Step 00
11132 - Insert set screw
Insert set screw
11129 - Use 0.05-in. hex driver. Rotate clockwise. Insert set screw fully into knob. If ...
Use 0.05-in. hex driver. Rotate clockwise. Insert set screw fully into knob. If available, use a torque driver set to 2 in-lbs. [pounds]. Do not overtighten.
