8815 - Local Alarm and Fault Indication | FRONTLINE Maintenance Tool

5882 - 545 - Contact Technical Support - Incomplete, Notes: 5881

545 - Contact Technical Support

Contact Technical Support

Step Reference Number

18

Note

5881 - Řešení problémů nedokončeno. Obraťte se na technickou podporu.Poskytněte technic...

1544 - 546 - Done - Complete, Notes: 547

546 - Done

Done

Step Reference Number

20

Note

547 - Řešení problémů je dokončeno.

8823 - 8168 - Did this fix the problem? - Decision, Notes:

8168 - Did this fix the problem?

Did this fix the problem?

Yes

Go to

1544 - 546 - Done - Complete, Notes: 547

No

Go to

9057 - 9054 - Disconnect RPM Battery - Process, Notes: 9055

Step Reference Number

07

10051 - 10050 - What Alarm/Fault is being generated? - Decision, Notes:

10050 - What Alarm/Fault is being generated?

What Alarm/Fault is being generated?

GH/GL/GA

Go to

9948 - 9945 - Restart RPM - Decision, Notes: 9946

NH/NA

Go to

10000 - 10651 - Restart RPM - Decision, Notes: 9946

TAMPER

Go to

9204 - 8997 - AC LED on LD-260 illuminated? - Decision, Notes: 8998

10052 - 9025 - Possible Component Failure - Decision, Notes: 10049

9025 - Possible Component Failure

Possible Component Failure

Successful

Go to

1544 - 546 - Done - Complete, Notes: 547

Unsuccessful

Go to

5882 - 545 - Contact Technical Support - Incomplete, Notes: 5881

Note

10049 - Consult block diagrams and full schematics in the drawings section of the RPM...

10053 - 10047 - Replace GPRB - Formal Procedure, Notes: 9007

10047 - Replace GPRB

Replace GPRB

Go to

8823 - 8168 - Did this fix the problem? - Decision, Notes:

Note

9007 - Perform the following procedure:

10048 - DET-RPM-RAP-CM24, RPM GPRB-756 General Purpose Relay Board Replacement.

9095 - 9093 - Replace SC-771 Controller Board - Formal Procedure, Notes: 9007

9093 - Replace SC-771 Controller Board

Replace SC-771 Controller Board

Note

9007 - Perform the following procedure:

9094 - DET-RPM-RAP-CM09, RPM SC-771 Controller Board Replacement.

10056 - 10054 - GPRB input voltages correct? - Decision, Notes: 10055

10054 - GPRB input voltages correct?

GPRB input voltages correct?

Yes

Go to

10053 - 10047 - Replace GPRB - Formal Procedure, Notes: 9007

No

Go to

9095 - 9093 - Replace SC-771 Controller Board - Formal Procedure, Notes: 9007

Note

10055 - With the alarm/fault condition in question indicated on the SC-770 controller...

10059 - 10057 - GPRB output voltages correct? - Decision, Notes: 10058

10057 - GPRB output voltages correct?

GPRB output voltages correct?

Yes

Go to

10052 - 9025 - Possible Component Failure - Decision, Notes: 10049

No

Go to

10056 - 10054 - GPRB input voltages correct? - Decision, Notes: 10055

Note

10058 - With the alarm/fault condition in question indicated on the SC-770 controller...

10061 - 10060 - Alarm/Fault indication functioning properly? - Decision, Notes:

10060 - Alarm/Fault indication functioning properly?

Alarm/Fault indication functioning properly?

Yes

Go to

1544 - 546 - Done - Complete, Notes: 547

No

Go to

10059 - 10057 - GPRB output voltages correct? - Decision, Notes: 10058

10065 - 10062 - Alarm/Fault Condition on Controller - Decision, Notes: 10063

10062 - Alarm/Fault Condition on Controller

Alarm/Fault Condition on Controller

Yes

Go to

10061 - 10060 - Alarm/Fault indication functioning properly? - Decision, Notes:

No

Go to

10051 - 10050 - What Alarm/Fault is being generated? - Decision, Notes:

Note

10063 - Generate the alarm/fault condition (GA, NA, GH, GL, NH, TAMPER) in question p...

10064 - Is the alarm/fault condition indicated on the SC-770 controller display? ...

10068 - 10066 - Turn RELAY OUTPUT “ON” - Process, Notes: 10067

10066 - Turn RELAY OUTPUT “ON”

Turn RELAY OUTPUT “ON”

Go to

10065 - 10062 - Alarm/Fault Condition on Controller - Decision, Notes: 10063

Note

10067 - Press “1” on the controller to toggle RELAY OUTPUT “ON”.

9904 - Press the # key 3 times to exit programming mode

10072 - 10069 - “RELAY OUTPUT” parameter “ON”? - Decision, Notes: 10070

10069 - “RELAY OUTPUT” parameter “ON”?

“RELAY OUTPUT” parameter “ON”?

Yes

Go to

10065 - 10062 - Alarm/Fault Condition on Controller - Decision, Notes: 10063

No

Go to

10068 - 10066 - Turn RELAY OUTPUT “ON” - Process, Notes: 10067

Note

10070 - Is the RELAY OUTPUT parameter setting in the SC-770 on?

10071 - 1:Gamma>2:Functions>5:RELAY OUTPUT

10075 - 10076 - Disconnect GPRB Input - Decision, Notes: 10077

10076 - Disconnect GPRB Input

Disconnect GPRB Input

Yes

Go to

9095 - 9093 - Replace SC-771 Controller Board - Formal Procedure, Notes: 9007

No

Go to

10053 - 10047 - Replace GPRB - Formal Procedure, Notes: 9007

Note

10077 - Disconnect the J1 connector on the General Purpose Relay Board (GPRB).

10074 - Did alarm/fault indications stop when input was disconnected?

10081 - 10079 - Alarm and Fault Indications Constantly on? - Decision, Notes: 10080

10079 - Alarm and Fault Indications Constantly on?

Alarm and Fault Indications Constantly on?

Yes

Go to

10075 - 10076 - Disconnect GPRB Input - Decision, Notes: 10077

No

Go to

10072 - 10069 - “RELAY OUTPUT” parameter “ON”? - Decision, Notes: 10070

Note

10080 - Are any LEDs, strobes, or siren on the control pillar constantly on?