8814 - Tamper | FRONTLINE Maintenance Tool

5882 - 545 - Contact Technical Support - Incomplete, Notes: 5881

545 - Contact Technical Support

Contact Technical Support

Step Reference Number

18

Note

5881 - Troubleshooting incomplete. Contact technical support. Provide the ...

1544 - 546 - Done - Complete, Notes: 547

546 - Done

Done

Step Reference Number

20

Note

547 - Troubleshooting is complete.

8823 - 8168 - Did this fix the problem? - Decision, Notes:

8168 - Did this fix the problem?

Did this fix the problem?

Yes

Go to

1544 - 546 - Done - Complete, Notes: 547

No

Go to

9057 - 9054 - Disconnect RPM Battery - Process, Notes: 9055

Step Reference Number

07

9136 - 545 - Contact Technical Support - Incomplete, Notes: 9135

545 - Contact Technical Support

Contact Technical Support

Note

9135 - There is a chance that the fault is one of the wires or terminal blocks

9009 - 9006 - Replace LD-260 - Formal Procedure, Notes: 9007

9006 - Replace LD-260

Replace LD-260

Step Reference Number

14

Note

9007 - Perform the following procedure:

9008 - DET-RPM-RAP-CM06, RPM LD-260 Load Disconnect Replacement.

9139 - 9137 - Repair door tamper switch - Formal Procedure, Notes: 9007

9137 - Repair door tamper switch

Repair door tamper switch

Note

9007 - Perform the following procedure:

9138 - DET-RPM-RAP-CM31, RPM Tamper Switch Alignment, Replacement, and Repair

9143 - 9140 - Remove Molex Connector - Process, Notes: 9141

9140 - Remove Molex Connector

Remove Molex Connector

Go to

1544 - 546 - Done - Complete, Notes: 547

Note

9141 - Remove Molex connector from the circuit.

9142 - Splice the wires back together.

9148 - 9144 - Troubleshoot Molex connector - Decision, Notes: 9145

9144 - Troubleshoot Molex connector

Troubleshoot Molex connector

Yes

Go to

9143 - 9140 - Remove Molex Connector - Process, Notes: 9141

No

Go to

9136 - 545 - Contact Technical Support - Incomplete, Notes: 9135

Note

9145 - Disconnect Molex connector

9146 - Place a jumper across the circuit to bypass the connector

9147 - Does this clear the fault?

9153 - 9149 - Troubleshoot LD-260 - Decision, Notes: 9150

9149 - Troubleshoot LD-260

Troubleshoot LD-260

Yes

Go to

9009 - 9006 - Replace LD-260 - Formal Procedure, Notes: 9007

No

Go to

9136 - 545 - Contact Technical Support - Incomplete, Notes: 9135

Note

9150 - Disconnect 6 pin Molex connector J2

9151 - Place a jumper between pin 4 and 6 on the Molex connector

9152 - Does this clear the tamper?

9156 - 9154 - Bypass LD-260 loss of AC circuit - Decision, Notes: 9155

9154 - Bypass LD-260 loss of AC circuit

Bypass LD-260 loss of AC circuit

Yes

Go to

9153 - 9149 - Troubleshoot LD-260 - Decision, Notes: 9150

No

Go to

9136 - 545 - Contact Technical Support - Incomplete, Notes: 9135

Note

9155 - In the control pillar, place a jumper between TB-2 pin 9 and ground.

9152 - Does this clear the tamper?

9162 - 9157 - Bypass utility panel tamper switch - Process, Notes: 9158

9157 - Bypass utility panel tamper switch

Bypass utility panel tamper switch

Go to

8823 - 8168 - Did this fix the problem? - Decision, Notes:

Note

9158 - For utility panel tamper switch:

9159 - Disconnect the connectors

9160 - Place a jumper across the circuit to bypass the tamper switch.

9161 - If this clears the fault, verify magnet/switch position and alignment are cor...

9166 - 9163 - Test utility panel switch circuit - Decision, Notes: 9164

9163 - Test utility panel switch circuit

Test utility panel switch circuit

Yes

Go to

9162 - 9157 - Bypass utility panel tamper switch - Process, Notes: 9158

No

Go to

9156 - 9154 - Bypass LD-260 loss of AC circuit - Decision, Notes: 9155

Note

9164 - Bypass the utility panel door switch by placing a jumper across control pilla...

9152 - Does this clear the tamper?

9165 - Remove jumper.

9169 - 9167 - Bypass each door tamper switch - Decision, Notes: 9168

9167 - Bypass each door tamper switch

Bypass each door tamper switch

Yes

Go to

9139 - 9137 - Repair door tamper switch - Formal Procedure, Notes: 9007

No

Go to

9148 - 9144 - Troubleshoot Molex connector - Decision, Notes: 9145

Note

9168 - For each tamper switch in the pillar:

9159 - Disconnect the connectors

9160 - Place a jumper across the circuit to bypass the tamper switch.

9152 - Does this clear the tamper?

9173 - 9170 - Test cabinet door switch circuit - Decision, Notes: 9171

9170 - Test cabinet door switch circuit

Test cabinet door switch circuit

Yes

Go to

9169 - 9167 - Bypass each door tamper switch - Decision, Notes: 9168

No

Go to

9166 - 9163 - Test utility panel switch circuit - Decision, Notes: 9164

Note

9171 - Bypass all door tamper switches in the control pillar by placing a jumper acr...

9172 - Bypass all door tamper switches in the Auxiliary pillar by placing a jumper a...

9152 - Does this clear the tamper?

9165 - Remove jumper.

9182 - 9177 - Test main tamper circuit - Decision, Notes: 9178

9177 - Test main tamper circuit

Test main tamper circuit

Yes

Go to

9173 - 9170 - Test cabinet door switch circuit - Decision, Notes: 9171

No

Go to

9098 - 9096 - Replace SCA-774 Board - Formal Procedure, Notes: 9007

Note

9178 - Move the white tamper signal wire from:

9179 - Control Pillar - TB-2 pin 7 to any green terminal.

9180 - Auxiliary pillar - TB-6 pin 7 to any green terminal.

9152 - Does this clear the tamper?

9181 - Return wire to its original position.

9191 - 9183 - Identify pillar generating fault - Process, Notes: 9184

9183 - Identify pillar generating fault

Identify pillar generating fault

Go to

9182 - 9177 - Test main tamper circuit - Decision, Notes: 9178

Note

9184 - Open control pillar middle door

9114 - Disable the door tamper switch with a magnet (or piece of tape for spring loa...

9041 - Using a digital multimeter in DC mode,verify 15 VDC at TB1 pins 1, 2, and 3.

9185 - measure the tamper signal input voltage to the SC-771 board at: Con...

9190 - Troubleshoot pillar that contains the tamper fault.

9195 - 9192 - Troubleshoot cabinet door - Decision, Notes: 9193

9194 - Caution : Door latch mechanisms have plastic components and breakage will result in nee...

Type

Caution

Door latch mechanisms have plastic components and breakage will result in need to replace door.

9192 - Troubleshoot cabinet door

Troubleshoot cabinet door

Yes

Go to

1544 - 546 - Done - Complete, Notes: 547

No

Go to

9139 - 9137 - Repair door tamper switch - Formal Procedure, Notes: 9007

Note

9193 - For the affected door, check tightness of locking mechanism. Door latch mecha...

9152 - Does this clear the tamper?

9198 - 9196 - Did the amber fault LED on control pillar turn off? - Decision, Notes: 9197

9196 - Did the amber fault LED on control pillar turn off?

Did the amber fault LED on control pillar turn off?

Yes

Go to

9195 - 9192 - Troubleshoot cabinet door - Decision, Notes: 9193

No

Go to

9191 - 9183 - Identify pillar generating fault - Process, Notes: 9184

Note

9197 - Did the amber LED turn off while pushing firmly on a door?

9203 - 9199 - Push firmly on all cabinet doors - Process, Notes: 9200

9202 - Note : A cabinet tamper fault condition is often caused by a loose cabinet door latc...

Type

Note

A cabinet tamper fault condition is often caused by a loose cabinet door latch.

9199 - Push firmly on all cabinet doors

Push firmly on all cabinet doors

Go to

9198 - 9196 - Did the amber fault LED on control pillar turn off? - Decision, Notes: 9197

Note

9200 - Close all RPM cabinet doors.

9201 - While watching the amber fault light on the control pillar, push firmly on th...

9204 - 8997 - AC LED on LD-260 illuminated? - Decision, Notes: 8998

8997 - Start

Start

Yes

Go to

9203 - 9199 - Push firmly on all cabinet doors - Process, Notes: 9200

No

Go to

9005 - 8997 - AC LED on LD-260 illuminated? - Decision, Notes: 8998

Note

8998 - Is the AC LED on the LD-260 illuminated?