9775 - Caution : Do not toggle the LD-260 switch before measuring the AC voltage at the input ... Read more about 9775 - Caution : Do not toggle the LD-260 switch before measuring the AC voltage at the input ...
9687 - Caution : Do not overheat the wire and/or circuit boards when using heat gun. Do not po... Read more about 9687 - Caution : Do not overheat the wire and/or circuit boards when using heat gun. Do not po...
9604 - Caution : Avoid tearing or binding the rubber O-ring at the base of the connector shell... Read more about 9604 - Caution : Avoid tearing or binding the rubber O-ring at the base of the connector shell...
9582 - Caution : Do not disconnect cable from cleaned tube. Read more about 9582 - Caution : Do not disconnect cable from cleaned tube.
9573 - Caution : Do not bend or twist the high voltage wire lead. Read more about 9573 - Caution : Do not bend or twist the high voltage wire lead.
9565 - Caution : Heating of the detector tube shall not exceed 100°C. Read more about 9565 - Caution : Heating of the detector tube shall not exceed 100°C.
9560 - Caution : For quality check, spray alcohol on a piece of clean glass and let evaporate.... Read more about 9560 - Caution : For quality check, spray alcohol on a piece of clean glass and let evaporate....
9545 - Caution : Oils from skin may contaminate the insulating surfaces. Either lint-free cott... Read more about 9545 - Caution : Oils from skin may contaminate the insulating surfaces. Either lint-free cott...
9457 - Caution : Verify correct firmware file (.bin) is loaded. Read more about 9457 - Caution : Verify correct firmware file (.bin) is loaded.
9455 - Caution : If you rotate the cover of the SC-770 down without first pulling out from the... Read more about 9455 - Caution : If you rotate the cover of the SC-770 down without first pulling out from the...
