7798 - Caution : Never remove connectors by pulling on wires.
Type
Caution
Never remove connectors by pulling on wires.
7792 - Note : It is good engineering practice to ensure all cables and connectors are label...
Type
Note
It is good engineering practice to ensure all cables and connectors are labeled before disconnecting them.
Step 00
7799 - Disconnect 4 wiring harness assembly/connectors (J6, J8, J10, J11) from SCA-7...
Disconnect 4 wiring harness assembly/connectors (J6, J8, J10, J11) from SCA-774 board
7800 - J8 and J11 should be labeled; write J6 and J10 on the appropriate connector i...
J8 and J11 should be labeled; write J6 and J10 on the appropriate connector in permanent marker.
J8 and J11 should be easily removed by grasping the connector and pulling it out with a gentle rocking motion.
J10 is locked in place by the position of J6; remove J6 first.