RPM +12 VDC Battery Load Test | FRONTLINE Maintenance Tool

Last Updated: 04/24/2025 1:44 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
Rapiscan VM-250 Vehicle Monitor	Device	Published	10/14/2024 9:50 AM
Rapiscan PM-700 Pedestrian Monitor	Device	Published	06/20/2024 11:38 AM
Rapiscan TM-850 Rail Monitor	Device	Published	09/18/2024 10:28 AM
7621 - 1401 - Establish Initial Conditions; Remark:	Procedure Step	Published	06/29/2023 5:37 PM
1401 - Establish Initial Conditions	Instruction	Published	09/30/2022 3:14 PM
7622 - 7592 - Inform system operators; Remark:11335	Procedure Step	Published	04/20/2025 10:15 AM
7592 - Inform system operators	Instruction	Published	06/29/2023 3:20 PM
11335 - Upon arrival, brief system operators on expected work, duration, anticipated ...	Remark	Published	04/20/2025 10:14 AM
7623 - 7593 - Brief system operators on expected work and duration before starting work&nbs...; Remark:	Procedure Step	Published	06/29/2023 4:56 PM
7593 - Brief system operators on expected work and duration before starting work&nbs...	Instruction	Published	06/29/2023 3:22 PM
7624 - 7594 - Close lane and set up barriers to establish a safety watch; Remark:7595	Procedure Step	Published	06/29/2023 4:57 PM
7594 - Close lane and set up barriers to establish a safety watch	Instruction	Published	06/29/2023 3:28 PM
7595 - Use orange safety (traffic control) cones or equivalent per site-specific saf...	Remark	Published	06/29/2023 3:33 PM
7625 - 7596 - Perform +12 VDC Battery Load Test; Remark:	Procedure Step	Published	06/29/2023 4:58 PM
7596 - Perform +12 VDC Battery Load Test	Instruction	Published	06/29/2023 3:38 PM
7626 - 7597 - Unlock and open RPM cabinets doors as required to access cabinet interior...; Remark:	Procedure Step	Published	06/29/2023 4:59 PM
7597 - Unlock and open RPM cabinets doors as required to access cabinet interior...	Instruction	Published	06/29/2023 3:40 PM
7270 - 7235 - Power off RPM; Remark:7236	Procedure Step	Published	09/01/2023 7:57 PM
7235 - Power off RPM	Instruction	Published	04/24/2023 12:30 PM
7236 - Move LD-260 switch to OFF position. The PWR ON	Remark	Published	04/27/2023 4:25 PM
7629 - 7600 - Switch ac power off so green window is visible; Remark:7628	Procedure Step	Published	04/13/2025 6:19 PM
7599 - Warning : 120/220 Vac will be present at the input side of the ac circuit breaker.&nbsp...	Annotation	Published	06/29/2023 3:43 PM
7600 - Switch ac power off so green window is visible	Instruction	Published	04/13/2025 5:48 PM
7628 - Breaker Off	Remark	Published	06/29/2023 5:01 PM
7280 - 7250 - Power on RPM; Remark:7251	Procedure Step	Published	04/27/2023 4:14 PM
7250 - Power on RPM	Instruction	Published	05/01/2023 8:31 AM
7251 - Move LD-260 switch to ON position. The LED PWR ON	Remark	Published	05/10/2023 3:14 PM
11339 - 6914 - Verify battery operation; Remark:11338	Procedure Step	Published	04/20/2025 1:30 PM
6914 - Verify battery operation	Instruction	Published	12/21/2022 12:41 PM
11338 - If the RPM does not power on, replace battery by performing procedure ...	Remark	Published	04/20/2025 1:28 PM
7633 - 7606 - Measure and record battery voltage; Remark:7632	Procedure Step	Published	06/29/2023 5:09 PM
7605 - Standard : Using a DMM, the battery voltage should be approximately 12 to 13 VDC.	Annotation	Published	06/29/2023 4:01 PM
7606 - Measure and record battery voltage	Instruction	Published	06/29/2023 4:02 PM
7632 - VDC Battery	Remark	Published	06/29/2023 5:09 PM
7634 - 7607 - Wait approximately 1 hour; Remark:	Procedure Step	Published	06/29/2023 5:10 PM
7607 - Wait approximately 1 hour	Instruction	Published	06/29/2023 4:05 PM
7635 - 7608 - Re-measure battery voltage; Remark:7609	Procedure Step	Published	06/29/2023 5:11 PM
7608 - Re-measure battery voltage	Instruction	Published	06/29/2023 4:09 PM
7609 - If the battery voltage is less than 11 VDC, replace the battery by performing...	Remark	Published	06/29/2023 4:11 PM
7636 - 7610 - Switch ac power on so red window is visible; Remark:7611	Procedure Step	Published	06/29/2023 5:12 PM
7610 - Switch ac power on so red window is visible	Instruction	Published	06/29/2023 4:13 PM
7611 - Amber "ac" light on LD-260 should illuminate.	Remark	Published	04/13/2025 5:48 PM
7637 - 7612 - Close and lock RPM cabinets; Remark:	Procedure Step	Published	06/29/2023 5:12 PM
7612 - Close and lock RPM cabinets	Instruction	Published	06/29/2023 4:23 PM
7279 - 7249 - Return equipment to normal operating condition; Remark:	Procedure Step	Published	04/27/2023 4:13 PM
7249 - Return equipment to normal operating condition	Instruction	Published	04/08/2025 3:22 PM
7282 - 7254 - Confirm network connection; Remark:7255	Procedure Step	Published	04/27/2023 4:15 PM
7254 - Confirm network connection	Instruction	Published	04/27/2023 2:22 PM
7255 - Contact operators to confirm communications have been reestablished between RPM ...	Remark	Published	05/10/2023 3:15 PM
7640 - 7616 - Close, reopen, and close cabinet doors to clear all tampers from fault queue; Remark:	Procedure Step	Published	06/29/2023 5:17 PM
7616 - Close, reopen, and close cabinet doors to clear all tampers from fault queue	Instruction	Published	06/29/2023 4:42 PM
7641 - 7617 - Open lane; Remark:	Procedure Step	Published	06/29/2023 5:17 PM
7617 - Open lane	Instruction	Published	06/29/2023 4:43 PM
7842 - 7820 - Inform system operators upon completion of maintenance action; Remark:	Procedure Step	Published	07/07/2023 11:15 PM
7820 - Inform system operators upon completion of maintenance action	Instruction	Published	07/07/2023 10:02 PM
322 - 321 - Document maintenance actions; Remark:	Procedure Step	Published	06/17/2021 9:49 AM
321 - Document maintenance actions	Instruction	Published	04/21/2025 11:19 AM
2869 - 2585 - Document maintenance performed; Remark:2866	Procedure Step	Published	06/18/2021 5:58 PM
2585 - Document maintenance performed	Instruction	Published	07/09/2021 12:15 PM
2866 - Record observations, times, and results for the maintenance report.	Remark	Published	04/21/2025 11:39 AM
4706 - 4705 - Submit report; Remark:4864	Procedure Step	Published	06/29/2022 9:50 AM
4705 - Submit report	Instruction	Published	06/29/2022 9:50 AM
4864 - As specified by management or contractual obligations.	Remark	Published	07/28/2022 1:36 PM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
Semi-annually	Frequency	Published	11/03/2022 2:10 PM
Warning	Annotation Type	Published	03/02/2020 3:25 PM
Standard	Annotation Type	Published	03/02/2020 3:25 PM
Technician 2	Skill Level	Published	04/09/2020 1:17 AM
Keys for RPM	Replacement Parts	Published	06/20/2023 4:47 PM
Reflective safety vest if applicable	Replacement Parts	Published	06/29/2023 5:46 PM
Safety glasses if applicable	Replacement Parts	Published	06/29/2023 5:46 PM
Traffic control cones or equivalent	Replacement Parts	Published	06/29/2023 5:46 PM
Digital multimeter DMM	Replacement Parts	Published	06/29/2023 5:46 PM
LD-260 Disconnect Switch Power Off	Image	Published	04/24/2023 12:49 PM
AC Circuit Breaker Off_0.png	Image	Published	06/29/2023 4:24 PM
LD-260 Disconnect Switch Power On	Image	Published	05/04/2023 3:37 PM
Battery VDC	Image	Published	06/29/2023 4:04 PM
AC Circuit Breaker On_0.png	Image	Published	06/29/2023 4:20 PM

DET-RPM-RAP-RM04

Perform +12 volts direct current (VDC) battery load test.

Equipment Hierarchy

Rapiscan VM-250 Vehicle Monitor

Rapiscan PM-700 Pedestrian Monitor

Rapiscan TM-850 Rail Monitor

Frequency

Semi-annually

Technician Level

Technician 2

x 1

Duration

Length of time

Tools Required

Keys for RPM

Reflective safety vest if applicable

Safety glasses if applicable

Traffic control cones or equivalent

Digital multimeter DMM

Materials Required

Applicable TSA Operations and Service Manuals

Originators

Craig Stinson

Bailey Toon

Originating Organization

PNNL

Safety Concerns

Electrical

Final Documentation

Routine maintenance report

Departmental Coordination

Coordinate site access with system operators

Date of Origin

2017-03-25

Version

0.00

Preparation

Step 1

Main Step

7621 - 1401 - Establish Initial Conditions; Remark:

Step 00

1401 - Establish Initial Conditions

Establish Initial Conditions

7622 - 7592 - Inform system operators; Remark:11335

Step 00

7592 - Inform system operators

Inform system operators

11335 - Upon arrival, brief system operators on expected work, duration, anticipated ...

Upon arrival, brief system operators on expected work, duration, anticipated alarms, and fault indications before starting work.

7623 - 7593 - Brief system operators on expected work and duration before starting work&nbs...; Remark:

Step 00

7593 - Brief system operators on expected work and duration before starting work&nbs...

Brief system operators on expected work and duration before starting work

7624 - 7594 - Close lane and set up barriers to establish a safety watch; Remark:7595

Step 00

7594 - Close lane and set up barriers to establish a safety watch

Close lane and set up barriers to establish a safety watch

7595 - Use orange safety (traffic control) cones or equivalent per site-specific saf...

Use orange safety (traffic control) cones or equivalent per site-specific safety practices.

Step 2

Main Step

7625 - 7596 - Perform +12 VDC Battery Load Test; Remark:

Step 00

7596 - Perform +12 VDC Battery Load Test

Perform +12 VDC Battery Load Test

7626 - 7597 - Unlock and open RPM cabinets doors as required to access cabinet interior...; Remark:

Step 00

7597 - Unlock and open RPM cabinets doors as required to access cabinet interior...

Unlock and open RPM cabinets doors as required to access cabinet interior

7270 - 7235 - Power off RPM; Remark:7236

Step 00

7235 - Power off RPM

Power off RPM

7236 - Move LD-260 switch to OFF position. The PWR ON

Move LD-260 switch to OFF position. The PWR ON LED will turn off.

7629 - 7600 - Switch ac power off so green window is visible; Remark:7628

7599 - Warning : 120/220 Vac will be present at the input side of the ac circuit breaker.&nbsp...

Type

Warning

120/220 Vac will be present at the input side of the ac circuit breaker.

Step 00

7600 - Switch ac power off so green window is visible

Switch ac power off so green window is visible

7628 - Breaker Off

7280 - 7250 - Power on RPM; Remark:7251

Step 00

7250 - Power on RPM

Power on RPM

7251 - Move LD-260 switch to ON position. The LED PWR ON

Move LD-260 switch to ON position. The LED PWR ON will illuminate.

11339 - 6914 - Verify battery operation; Remark:11338

Step 00

6914 - Verify battery operation

Verify battery operation

11338 - If the RPM does not power on, replace battery by performing procedure ...

If the RPM does not power on, replace battery by performing procedure

DET-RPM-RAP-CM28, RPM +12 VDC Battery Replacement

7633 - 7606 - Measure and record battery voltage; Remark:7632

7605 - Standard : Using a DMM, the battery voltage should be approximately 12 to 13 VDC.

Type

Standard

Using a DMM, the battery voltage should be approximately 12 to 13 VDC.

Step 00

7606 - Measure and record battery voltage

Measure and record battery voltage

7632 - VDC Battery

7634 - 7607 - Wait approximately 1 hour; Remark:

Step 00

7607 - Wait approximately 1 hour

Wait approximately 1 hour

7635 - 7608 - Re-measure battery voltage; Remark:7609

7605 - Standard : Using a DMM, the battery voltage should be approximately 12 to 13 VDC.

Type

Standard

Using a DMM, the battery voltage should be approximately 12 to 13 VDC.

Step 00

7608 - Re-measure battery voltage

Re-measure battery voltage

7609 - If the battery voltage is less than 11 VDC, replace the battery by performing...

If the battery voltage is less than 11 VDC, replace the battery by performing procedure DET-RPM-RAP-CM28, RPM +12 VDC Battery Replacement

7636 - 7610 - Switch ac power on so red window is visible; Remark:7611

Step 00

7610 - Switch ac power on so red window is visible

Switch ac power on so red window is visible

7611 - Amber "ac" light on LD-260 should illuminate.

Amber "ac" light on LD-260 should illuminate.

7637 - 7612 - Close and lock RPM cabinets; Remark:

Step 00

7612 - Close and lock RPM cabinets

Close and lock RPM cabinets

Step 3

Main Step

7279 - 7249 - Return equipment to normal operating condition; Remark:

Step 00

7249 - Return equipment to normal operating condition

Return equipment to normal operating condition

7282 - 7254 - Confirm network connection; Remark:7255

Step 00

7254 - Confirm network connection

Confirm network connection

7255 - Contact operators to confirm communications have been reestablished between RPM ...

Contact operators to confirm communications have been reestablished between RPM and central alarm station/local alarm station (CAS/LAS).

7640 - 7616 - Close, reopen, and close cabinet doors to clear all tampers from fault queue; Remark:

Step 00

7616 - Close, reopen, and close cabinet doors to clear all tampers from fault queue

Close, reopen, and close cabinet doors to clear all tampers from fault queue

7641 - 7617 - Open lane; Remark:

Step 00

7617 - Open lane

Open lane

7842 - 7820 - Inform system operators upon completion of maintenance action; Remark:

Step 00

7820 - Inform system operators upon completion of maintenance action

Inform system operators upon completion of maintenance action

Operation

Step 4

Main Step

322 - 321 - Document maintenance actions; Remark:

Step 00

321 - Document maintenance actions

Document maintenance actions

2869 - 2585 - Document maintenance performed; Remark:2866

Step 00

2585 - Document maintenance performed

Document maintenance performed

2866 - Record observations, times, and results for the maintenance report.

Record observations, times, and results for the maintenance report.

4706 - 4705 - Submit report; Remark:4864

Step 00

4705 - Submit report

Submit report

4864 - As specified by management or contractual obligations.

As specified by management or contractual obligations.

Document Type

Routine Maintenance Procedure

Percent Complete

100.00

Percent Complete W/Media

100.00