CSECO K910G Buster - Pocket Guide | FRONTLINE Maintenance Tool

Last Updated: 04/29/2025 1:50 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
10413 - 10412 - HOLD buster on surface to be scanned; Remark:	Procedure Step	Published	12/01/2023 2:24 PM
10412 - HOLD buster on surface to be scanned	Instruction	Published	12/01/2023 2:24 PM
10411 - 220 - Power on instrument; Remark:10415	Procedure Step	Published	04/20/2025 9:52 PM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
10415 -	Remark	Published	12/01/2023 2:45 PM
10409 - 10408 - KEEP trigger pushed for 2 seconds; Remark:	Procedure Step	Published	12/01/2023 2:26 PM
10408 - KEEP trigger pushed for 2 seconds	Instruction	Published	12/01/2023 2:26 PM
10428 - 10427 - Slowly MOVE buster over area, keeping trigger pushed; Remark:	Procedure Step	Published	12/01/2023 2:53 PM
10427 - Slowly MOVE buster over area, keeping trigger pushed	Instruction	Published	12/01/2023 2:53 PM
10426 - 10425 - OBSERVE values on display; Remark:	Procedure Step	Published	12/01/2023 2:54 PM
10425 - OBSERVE values on display	Instruction	Published	12/01/2023 2:54 PM
10424 - 10423 - RELEASE trigger when scan is complete; Remark:	Procedure Step	Published	12/01/2023 2:55 PM
10423 - RELEASE trigger when scan is complete	Instruction	Published	12/01/2023 2:55 PM
10407 - Reminder : The instrument should be calibrated every time it is taken into a new environ...	Annotation	Published	12/01/2023 2:22 PM
Pocket Guide	Document Type	Published	03/02/2020 3:32 PM
Reminder	Annotation Type	Published	04/08/2020 12:21 PM
CSECO K910G Trigger Button Pocket Guide	Image	Published	12/01/2023 2:33 PM

OTH-OTH-CSE-K910G-PG01

Search for contraband

Technician Level

Duration

Operation

Step 1

Main Step

10413 - 10412 - HOLD buster on surface to be scanned; Remark:

Step 00

10412 - HOLD buster on surface to be scanned

HOLD buster on surface to be scanned

Operation

Step 2

Main Step

10411 - 220 - Power on instrument; Remark:10415

Step 00

10409 - 10408 - KEEP trigger pushed for 2 seconds; Remark:

Step 00

10408 - KEEP trigger pushed for 2 seconds

KEEP trigger pushed for 2 seconds

Operation

Step 4

Main Step

10428 - 10427 - Slowly MOVE buster over area, keeping trigger pushed; Remark:

Step 00

10427 - Slowly MOVE buster over area, keeping trigger pushed

Slowly MOVE buster over area, keeping trigger pushed

Operation

Step 5

Main Step

10426 - 10425 - OBSERVE values on display; Remark:

Step 00

10425 - OBSERVE values on display

OBSERVE values on display

Operation

Step 6

Main Step

10424 - 10423 - RELEASE trigger when scan is complete; Remark:

Step 00

10423 - RELEASE trigger when scan is complete

RELEASE trigger when scan is complete

Reminders

10407 - Reminder : The instrument should be calibrated every time it is taken into a new environ...

Type

Reminder

The instrument should be calibrated every time it is taken into a new environment and on a regular monthly basis. Refer to DET-HHD-CSC-OP01, CSECO K910G Buster Operation for calibration instructions.

Document Type

Pocket Guide

Percent Complete

100.00

Percent Complete W/Media

100.00