Last Updated: 04/26/2025 1:34 AM
The following table lists all the components that make up the document.
Search for nuclear and other radioactive material
None.
As appropriate.
Complete revision, add 2 steps
786 - 219 - Verify there are no sources of radiation near instrument; Remark:7
219 - Verify there are no sources of radiation near instrument
Verify there are no sources of radiation near instrument
7 - No Radiation symbol

679 - 612 - Wait for instrument to complete start-up sequence; Remark:
612 - Wait for instrument to complete start-up sequence
Wait for instrument to complete start-up sequence
3086 - 3078 - VERIFY instrument is in SEARCH MODE; Remark:751
3078 - VERIFY instrument is in SEARCH MODE
VERIFY instrument is in SEARCH MODE
131 - 115 - SURVEY close to surface of item (5-10 centimeters); Remark:10467
115 - SURVEY close to surface of item (5-10 centimeters)
SURVEY close to surface of item (5-10 centimeters)
10467 -

3087 - 617 - SURVEY SLOWLY over entire item (20 centimeters/second); Remark:
617 - SURVEY SLOWLY over entire item (20 centimeters/second)
SURVEY SLOWLY over entire item (20 centimeters/second)
3088 - 3079 - CHANGE to FIND MODE when alarm is constant; Remark:3082
3079 - CHANGE to FIND MODE when alarm is constant
CHANGE to FIND MODE when alarm is constant
133 - 368 - Mark point(s) of interest; Remark:132
368 - Mark point(s) of interest
Mark point(s) of interest
136 - 117 - DOCUMENT results; Remark:
117 - DOCUMENT results
DOCUMENT results
3090 - 313 - Power off instrument; Remark:2545
313 - Power off instrument
Power off instrument
120 - Reminder : It is recommended to perform an operational test daily before use. DET-HHD-RA...
It is recommended to perform an operational test daily before use. DET-HHD-RAP-RM01, PRM-470 Operational Test.
121 - Reminder : If instrument does not move for 60 seconds, it will switch to background mode...
If instrument does not move for 60 seconds, it will switch to background mode.
3075 - Reminder : Do not operate the instrument at temperatures lower than 0°C or higher than ...
Do not operate the instrument at temperatures lower than 0°C or higher than 38°C.
3076 - Reminder : Power off instrument prior to connecting to charger.
Power off instrument prior to connecting to charger.