identiFINDER Battery Pack Change | FRONTLINE Maintenance Tool

Last Updated: 05/02/2025 1:38 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
FLIR identiFINDER 2 NG	Device	Published	10/24/2024 10:14 AM
3192 - 3174 - Prior to beginning, brief system operators on expected work, duration, and te...; Remark:	Procedure Step	Published	07/22/2021 2:02 PM
3174 - Prior to beginning, brief system operators on expected work, duration, and te...	Instruction	Published	07/22/2021 1:25 PM
3193 - 3173 - Loosen screw at end of handle; Remark:3181	Procedure Step	Published	07/22/2021 2:05 PM
3189 - Note : Small flat-blade screwdriver if using the powerPACK, Phillips PH1 screwdriver...	Annotation	Published	07/22/2021 1:50 PM
3173 - Loosen screw at end of handle	Instruction	Published	07/22/2021 1:24 PM
3181 - Do not remove the screw completely; just loosen until it freely slides in its...	Remark	Published	07/22/2021 1:45 PM
3194 - 3175 - Slide handle towards back of instrument until it slips free; Remark:3182	Procedure Step	Published	07/22/2021 2:05 PM
3175 - Slide handle towards back of instrument until it slips free	Instruction	Published	07/22/2021 1:28 PM
3182 - IO IDF Handle off slide	Remark	Published	07/22/2021 1:59 PM
3195 - 3176 - Remove existing battery pack from handle; Remark:3183	Procedure Step	Published	07/22/2021 2:06 PM
3176 - Remove existing battery pack from handle	Instruction	Published	07/22/2021 1:39 PM
3183 - IO IDF Battery slide out of handle	Remark	Published	07/22/2021 2:00 PM
3196 - 3177 - Insert replacement battery pack into handle; Remark:3184	Procedure Step	Published	07/22/2021 2:07 PM
3190 - Note : The powerPACK and powerPACK 2 are containers made to insert four (4) AA batte...	Annotation	Published	07/22/2021 1:51 PM
3191 - Note : The powerPACK plus, ultra, and ultra 2 are rechargeable self-contained batter...	Annotation	Published	07/22/2021 1:51 PM
3177 - Insert replacement battery pack into handle	Instruction	Published	07/22/2021 1:40 PM
3184 - Observe the orientation notch to find the correct orientation.	Remark	Published	07/22/2021 1:46 PM
3185 - Top of the battery pack must fall in line with the top of the handle; if it s...	Remark	Published	07/22/2021 1:47 PM
3197 - 3178 - Align handle with groove on side and move handle toward front of instrument; Remark:3186	Procedure Step	Published	07/22/2021 2:08 PM
3178 - Align handle with groove on side and move handle toward front of instrument	Instruction	Published	07/22/2021 1:42 PM
3186 - IO IDF Handle on slide	Remark	Published	07/22/2021 2:01 PM
3199 - 3179 - Fasten screw; Remark:3187	Procedure Step	Published	07/22/2021 2:09 PM
3179 - Fasten screw	Instruction	Published	07/22/2021 1:44 PM
3187 - Take care not to over-tighten compartment screw.	Remark	Published	07/22/2021 1:48 PM
3198 - 3180 - A rechargeable battery pack may need to be charged; Remark:3188	Procedure Step	Published	07/22/2021 2:09 PM
3180 - A rechargeable battery pack may need to be charged	Instruction	Published	07/22/2021 1:44 PM
3188 - Connect instrument to charger for 3 to 4 hours.	Remark	Published	07/22/2021 1:49 PM
Routine Maintenance Procedure	Document Type	Published	03/02/2020 3:31 PM
5 minutes	Duration	Published	04/01/2020 11:35 AM
As Needed	Frequency	Published	04/01/2020 11:36 AM
Note	Annotation Type	Published	03/02/2020 3:25 PM
Technician 1	Skill Level	Published	05/14/2020 2:56 PM
Small slotted (flathead) screwdriver	Tools	Published	09/11/2020 11:23 AM
Small Phillips (PH1) screwdriver	Tools	Published	05/14/2020 2:48 PM
IDF2 Remove Handle Screw CCW	Image	Published	05/05/2021 3:11 AM
IDF Slide Battery Handle OFF	Image	Published	05/05/2021 3:11 AM
IDF Battery out of handle	Image	Published	05/05/2021 3:11 AM
IDF Battery Notch	Image	Published	05/05/2021 3:11 AM
IDF Battery Wrong_Right in handle	Image	Published	05/05/2021 3:11 AM
IDF Slide Battery Handle ON	Image	Published	05/05/2021 3:11 AM
IDF Install Handle Screw CW	Image	Published	05/05/2021 3:11 AM

DET-HHD-FLR-IDF-RM11

Remove and replace identiFINDER battery pack

Equipment Hierarchy

FLIR identiFINDER 2 NG

Frequency

As Needed

Technician Level

Technician 1

x 1

Duration

Time increment

5 minutes

Length of time

Tools Required

Small slotted (flathead) screwdriver

Small Phillips (PH1) screwdriver

Materials Required

powerPACK (non-rechargeable)

powerPACK 2 (non-rechargeable)

replacement powerPACK plus (rechargeable)

replacement powerPACK ultra (rechargeable)

replacement powerPACK ultra2 (rechargeable, identiFINDER 2 ONLY)

Safety Concerns

None

Final Documentation

None

Step 1

Main Step

3192 - 3174 - Prior to beginning, brief system operators on expected work, duration, and te...; Remark:

Step 00

3174 - Prior to beginning, brief system operators on expected work, duration, and te...

Prior to beginning, brief system operators on expected work, duration, and temporary lack of instrument availability

Step 2

Main Step

3193 - 3173 - Loosen screw at end of handle; Remark:3181

3189 - Note : Small flat-blade screwdriver if using the powerPACK, Phillips PH1 screwdriver...

Type

Note

Small flat-blade screwdriver if using the powerPACK, Phillips PH1 screwdriver if using the powerPACK 2

Step 00

3173 - Loosen screw at end of handle

Loosen screw at end of handle

3181 - Do not remove the screw completely; just loosen until it freely slides in its...

Do not remove the screw completely; just loosen until it freely slides in its bearing.

Screw in handle base turns counter clockwise to remove

Step 3

Main Step

3194 - 3175 - Slide handle towards back of instrument until it slips free; Remark:3182

Step 00

3175 - Slide handle towards back of instrument until it slips free

Slide handle towards back of instrument until it slips free

3182 - IO IDF Handle off slide

Separate device to battery case by sliding

Step 4

Main Step

3195 - 3176 - Remove existing battery pack from handle; Remark:3183

Step 00

3176 - Remove existing battery pack from handle

Remove existing battery pack from handle

3183 - IO IDF Battery slide out of handle

Step 5

Main Step

3196 - 3177 - Insert replacement battery pack into handle; Remark:3184

3190 - Note : The powerPACK and powerPACK 2 are containers made to insert four (4) AA batte...

Type

Note

The powerPACK and powerPACK 2 are containers made to insert four (4) AA batteries (Alkaline or NiMH) and use as a backup for the rechargeable battery packs. Both of these containers have internal circuitry that prevents them from charging while they are installed in the identiFINDER.

3191 - Note : The powerPACK plus, ultra, and ultra 2 are rechargeable self-contained batter...

Type

Note

The powerPACK plus, ultra, and ultra 2 are rechargeable self-contained battery packs. Over time, these packs will lose their ability to maintain a charge and will need to be replaced.

Step 00

Main Step

Routine Maintenance Procedure

Percent Complete

100.00

Percent Complete W/Media

100.00