CSECO Freedomview Fiberscope | FRONTLINE Maintenance Tool

Last Updated: 04/29/2025 1:50 AM

The following table lists all the components that make up the document.

Title	Type	Status	Last Updated
10453 - 4783 - INSERT battery; Remark:	Procedure Step	Published	12/01/2023 3:49 PM
10452 - Note : The battery should be inserted with the green arrow positioned toward the ins...	Annotation	Published	12/01/2023 4:05 PM
4783 - INSERT battery	Instruction	Published	06/30/2022 5:38 PM
10451 - 220 - Power on instrument; Remark:10449	Procedure Step	Published	04/20/2025 9:52 PM
220 - Power on instrument	Instruction	Published	04/06/2025 7:00 PM
10449 - image of freedomview power button	Remark	Published	07/08/2024 10:31 AM
10445 - 10444 - VERIFY sufficient battery power is available; Remark:	Procedure Step	Published	12/01/2023 3:51 PM
10444 - VERIFY sufficient battery power is available	Instruction	Published	12/01/2023 3:51 PM
10443 - 10442 - CONNECT grounding cable if necessary; PLUG grounding cable into ESD common po...; Remark:	Procedure Step	Published	12/01/2023 3:53 PM
10442 - CONNECT grounding cable if necessary; PLUG grounding cable into ESD common po...	Instruction	Published	12/01/2023 3:53 PM
10441 - 10440 - Carefully GUIDE insertion shaft into area to be searched; Remark:	Procedure Step	Published	12/01/2023 3:53 PM
10440 - Carefully GUIDE insertion shaft into area to be searched	Instruction	Published	12/01/2023 3:53 PM
10439 - 10438 - OBSERVE image through eyepiece; Remark:	Procedure Step	Published	12/01/2023 3:54 PM
10438 - OBSERVE image through eyepiece	Instruction	Published	12/01/2023 3:54 PM
10437 - 10436 - ADJUST articulation as needed using lever; Remark:10435	Procedure Step	Published	07/08/2024 10:35 AM
10436 - ADJUST articulation as needed using lever	Instruction	Published	12/01/2023 3:55 PM
10435 - freedomview articulation	Remark	Published	12/01/2023 3:55 PM
10434 - 10433 - ADJUST light intensity as needed; Remark:	Procedure Step	Published	12/01/2023 3:56 PM
10433 - ADJUST light intensity as needed	Instruction	Published	12/01/2023 3:56 PM
10432 - 10431 - ADJUST focus as needed; Remark:	Procedure Step	Published	12/01/2023 3:57 PM
10431 - ADJUST focus as needed	Instruction	Published	12/01/2023 3:57 PM
10430 - 10429 - Carefully REMOVE insertion shaft; Remark:	Procedure Step	Published	12/01/2023 3:57 PM
10429 - Carefully REMOVE insertion shaft	Instruction	Published	12/01/2023 3:57 PM
10448 - 313 - Power off instrument; Remark:	Procedure Step	Published	04/21/2025 8:24 AM
313 - Power off instrument	Instruction	Published	07/23/2021 2:41 PM
10446 - 1816 - Remove battery; Remark:	Procedure Step	Published	12/01/2023 3:59 PM
1816 - Remove battery	Instruction	Published	11/20/2020 9:29 AM
10653 - 10277 - CONNECT battery to battery charger; Remark:	Procedure Step	Published	07/08/2024 9:38 AM
10277 - CONNECT battery to battery charger	Instruction	Published	11/16/2023 6:03 PM
10274 - Warning : Always use the grounding cable when checking fuel tanks to prevent explosions...	Annotation	Published	11/16/2023 5:38 PM
10272 - Caution : Do not force the articulation lever. This could severely damage the instrumen...	Annotation	Published	11/16/2023 5:40 PM
10273 - Caution : Do not exceed an articulation radius of 20mm when guiding the insertion shaft...	Annotation	Published	11/16/2023 5:40 PM
Pocket Guide	Document Type	Published	03/02/2020 3:32 PM
Note	Annotation Type	Published	03/02/2020 3:25 PM
Warning	Annotation Type	Published	03/02/2020 3:25 PM
Caution	Annotation Type	Published	03/02/2020 3:24 PM
Freedomview power on	Image	Published	12/01/2023 2:51 PM
Freedomview adjust articulation	Image	Published	12/01/2023 2:51 PM